The Praxsym CW Transmitter is a complete, portable continuous wave test source. Used as an input source to test a distributed antenna system, the Praxsym CW Transmitter can provide test signals aiding in the design and optimization of in-building and outdoor networks.
The intuitive menu configuration and touch screen display provide a simple to use solution to CW testing. The “Scan Mode” feature aids in the reduction of test times by transmitting multiple output configurations. Data can be collected through the use of a handheld spectrum analyzer.
The Praxsym CW Transmitter is a complete, portable continuous wave (CW) test source capable of transmitting test signals on two channels simultaneously. The output from each channel can be enabled independently. Frequency and output level for each channel can be set from the touch keys on the front panel or the LCD touchscreen display. Each channel contains four Setups.
Set-ups allow the user to input up to four output configurations per channel. Scan Mode, allows users to scan through the saved Setups at a user selected rate (Dwell Time). Dwell times can be set as low as 0.25 seconds, which allows the user to measure up to eight different frequencies with one pass through a ven-ue. Dwell times as high as 1.5 min are also available for test procedures which require longer amounts of time.
The transmitter can be powered using the internal 6 AA rechargeable batteries for 6 hours of continuous operation or from the AC/DC wall adapter included. Recharging takes 2 hours.
| KEY FEATURES |
| Calibrated RF output level |
| Backlit LCD touchscreen display |
| Reduced test times, using the scanning feature and 8 saved output configurations |
| Use as a test source to evaluate indoor and outdoor wireless coverage |
| Use as an input source to test a Distribute Antenna System |
| SPECIFICATIONS |
|
| Model: 310-010108-008 |
|
| Feature | Parameter |
| Channel 1 Frequency Characteristics | Frequency Range: 698-960 MHz
Channel Spacing: 10, 12.5, 30, & 200 kHz, 1.25 MHz
|
| Channel 2 Frequency Characteristics | Frequency Range: 1710-2180 MHz
Channel Spacing: 30 kHz, 200 kHz, 1.25 MHz
|
| Output Power | -10 to +12 dBm
Adjustable: 0.1 dBm
|
| Channel Setups | 4 Per Channel |
| Scan Mode Dwell Time | 0.2 to 99.9 Seconds |
| Harmonics | < -60 dBc |
| Temperature Range | 0-50 °C |
| Power | AC or DC Rechargeable Batteries |
| Battery Operating Time | 6 hours, Both Channels Transmitting Full Power |
| External Dimensions | 7" x 5" x 3" |
| Weight | 4 lbs |
| RF Output | 2 Ports, N-type Female |
| SPECIFICATIONS |
|
|
|
|
|
| Dual Channel CW Test Transmitters Overview |
|
|
|
|
|
| Model / Part Number | Freq. Range
Channel 1 | Freq. Range
Channel 2 | Output Level
(0.1 dBm steps) | Connector | Run Time
(Hr) |
| 310-010108-008 | 698-960 MHz | 1710-2180 MHz | -10 to +12 dBm | N-type | 6-8 |
| 310-010108-011 | 136-174 MHz | 396-512 MHz | -10 to +12 dBm | N-type | 6-8 |
| 310-010108-012 | 698-960 MHz | 1710-2180 MHz | 0 to +22 dBm | N-type | 4-5 |
| 310-010108-014 | 617-652/663-698 MHz
698-960 MHz
| 1710-2180 MHz
2305-2320/2345-2360 MHz
2495-2690 MHz
| -10 to +12 dBm | N-type | 5-6 |
| 310-010108-015 | 608-614 MHz
698-960 MHz
| 1395-1400 MHz / 1427-1432 MHz
1710-2180 MHz
| -10 to +12 dBm | N-type | 6-8 |
| 310-010108-016 | 617-652/663-698 MHz
698-960 MHz
| 1710-2180 MHz
2305-2320/2345-2360 MHz
2495-2690 MHz
| 0 to +22 dBm | N-type | 4-5 |
| 310-010108-017 | 1710-2180 MHz
2305-2320/2345-2360 MHz
2495-2690 MHz
| 3450-4200 MHz | -10 to +12 dBm | N-Type | 5-6 |
| SPECIFICATIONS |
|
|
|
|
|
| Two Watt Single Channel CW Transmitters Overview |
|
|
|
|
|
| Model / Part Number | Frequency Range | Channel Spacing | Output Level (0.1 dBm steps) | Connector | Run Time (Hr) |
| 310-010129-001 | 2495-2690 MHz | 250 kHz, 1.00 MHz | +10 to +33 dBm | N-type | 2 |
| 310-010129-003 | 1710-2170 MHz | 30 kHz, 200 kHz, 1.25 MHz | +10 to +33 dBm | N-type | 2 |
| 310-010129-004 | 698-960 MHz | 10,12.5,30 & 200 kHz, 1.25 MHz | +10 to +33 dBm | N-type | 2 |
