You are browsing the BE_FR site. Would you like to be redirected to another country or region to see content and products specific to your location?

Devis Rapide: Farnell AP60-150

+32 15 740 800Besoin d'aide ? Demander l'aide d'un expert.

Farnell AP60-150

DC Autoranging Power Supply; 60V / 150A / 3kW

Modèle

AP60-150

Gamme de produits

Power Supplies / Electronic Loads

Fabricant

Farnell

Cette configuration a les caractéristiques suivantes:

Power Supplies / Electronic LoadsDC Power Supplies >50V

Configurations

Caractéristiques principales

Description produit

Ressources

Laissez-nous vous conseiller sur la configuration exacte

Cliquez sur 'Configurez votre produit' et nous vous contacterons pour vous adresser un devis conforme à votre besoin.

Vous pouvez cliquer sur Contactez-moi, si vous préférez, et nos experts vous guideront vers la bonne solution technique et financière.

Description produit

The AP series power supplies utilise an autoranging concept and can provide a wide and adjustable range of voltage and current combinations within their constant power envelope. This is ideal for bench or systems use because a single unit will often meet your future as well as present needs.

Key Features

500W, 1kW and 3kW models available

Manual or IEEE 488.2 bus (GPIB)

High resolution programming and readback with interface options

Constant voltage or constant current operation

Operating modes: local or bus control, remote sensing, remote programming, auto parallel, auto series, auto tracking

Master/slave operation for more power or higher voltages

Digital LED panel meters and annunciators

Easily rack mountable, ideal for systems use

Active power factor correction on 3kW models

Benefits
Compact and Efficient	Because they utilise an efficient switchmode topology AP Series units are compact and relatively lightweight for their considerable power outputs. They are suitable for stand-alone bench use or for integrating into systems
Powerful Outputs	The voltage and current capability of the units is shown graphically in the SPECIFICATION section and can be determined when in use from two front panel bar graphs which show volts with available current, and current with available volts.
Protected	CV/CI power supplies are inherently safe as both output voltage and current will be automatically limited to the preset values.
Remote Sensing	When supplying a load which is some distance from the output, the remote sensing terminals should be used to maintain regulation at the load rather than at the unit’s output terminals. Up to 0.5 volts drop per load lead can be allowed for without degrading the specified CV performance.
Multiple Unit Operation	Up to four units can be connected for auto-parallel (master/slave) operation to increase total output current.

Specifications
AP Series Autoranging Power Supplies
Model Overview
Model	V Step	I Step	Programming Accuracy	Readback Accuracy
AP20-80	5mV	20mA	Voltage: 0.2% of output +0.13% f.s. Current:: 1.1% of output +0.13% f.s. Overvoltage trip: 1 % of output +0.16% f.s.	Voltage: 0.2% of output +0.13% f.s. Current:: 1.1 % of output +0 16% f.s
AP70-30	20mV	10mA	Voltage: 0.2% of output +0.13% f.s. Current:: 1.1% of output +0.13% f.s. Overvoltage trip: 1 % of output +0.16% f.s.	Voltage: 0.2% of output +0.13% f.s. Current:: 1.1 % of output +0 16% f.s
AP400-5	100mV	1.25mA	Voltage: 0.2% of output +0.13% f.s. Current:: 1.1% of output +0.13% f.s. Overvoltage trip: 1 % of output +0.16% f.s.	Voltage: 0.2% of output +0.13% f.s. Current:: 1.1 % of output +0 16% f.s
AP30-80	10mV	20mA	Voltage: 0.2% of output +0.13% f.s. Current:: 1.1% of output +0.13% f.s. Overvoltage trip: 1 % of output +0.16% f.s.	Voltage: 0.2% of output +0.13% f.s. Current:: 1.1 % of output +0 16% f.s
AP60-50	20mV	12.50mA	Voltage: 0.2% of output +0.13% f.s. Current:: 1.1% of output +0.13% f.s. Overvoltage trip: 1 % of output +0.16% f.s.	Voltage: 0.2% of output +0.13% f.s. Current:: 1.1 % of output +0 16% f.s
AP100-30	25mV	10mA	Voltage: 0.2% of output +0.13% f.s. Current:: 1.1% of output +0.13% f.s. Overvoltage trip: 1 % of output +0.16% f.s.	Voltage: 0.2% of output +0.13% f.s. Current:: 1.1 % of output +0 16% f.s
AP30-250	10mV	100mA	Voltage: 0.2% of output +0.13% f.s. Current:: 1.1% of output +0.13% f.s. Overvoltage trip: 1 % of output +0.16% f.s.	Voltage: 0.2% of output +0.13% f.s. Current:: 1.1 % of output +0 16% f.s
AP60-150	20mV	50mA	Voltage: 0.2% of output +0.13% f.s. Current:: 1.1% of output +0.13% f.s. Overvoltage trip: 1 % of output +0.16% f.s.	Voltage: 0.2% of output +0.13% f.s. Current:: 1.1 % of output +0 16% f.s
AP100-90	25mV	25mA	Voltage: 0.2% of output +0.13% f.s. Current:: 1.1% of output +0.13% f.s. Overvoltage trip: 1 % of output +0.16% f.s.	Voltage: 0.2% of output +0.13% f.s. Current:: 1.1 % of output +0 16% f.s

Specifications
AP Series Autoranging Power Supplies
Series Overview
Model	Description
1kW Power Limit
AP30-80	0-30V/0-80A
AP60-50	0-60V/0-50A
AP100-30	0-100V/0-30A
3kW Power Limit
AP30-250	0-30V/0-250A
AP60-150	0-60V/0-150A
AP100-90	0-100V/0-90A

Aucun résultat ne correspond à votre recherche ?

Nous contacter