Produits Fabricant Services Solutions Resources Promotions About us

Devis Rapide: Rohde & Schwarz ZV-WR12 (1307.7700.10)

zna-vector-network-analyzers-front-high-rohde-schwarz_200_6696_1024_576_2.jpg

+32 15 740 800Besoin d'aide ? Demander l'aide d'un expert.

zv-wrx-network-analyzer-calibration-kits-_-waveguide-side-view-rohde-schwarz_200_10392_1024_576_3.jpg

zv-wrx-network-analyzer-calibration-kits-_-waveguide-side-view-rohde-schwarz_200_10393_1024_576_2.jpg

zv-wrx-network-analyzer-calibration-kits-_-waveguide-side-view-rohde-schwarz_200_10394_1024_576_3.jpg

Rohde & Schwarz ZV-WR12 (1307.7700.10)

Waveguide Calibration Kit; WR12, Without Sliding Match, 60 GHz to 90 GHz

Modèle

ZV-WR12 (1307.7700.10)

Gamme de produits

RF & Microwave Network Analyzers

Fabricant

Rohde & Schwarz

Cette configuration a les caractéristiques suivantes:

RF & Microwave Network AnalyzersCal Kits85GHz <50GHz <= 85GHz

Configurations

Caractéristiques principales

Description produit

Ressources

Laissez-nous vous conseiller sur la configuration exacte

Cliquez sur 'Configurez votre produit' et nous vous contacterons pour vous adresser un devis conforme à votre besoin.

Vous pouvez cliquer sur Contactez-moi, si vous préférez, et nos experts vous guideront vers la bonne solution technique et financière.

Caractéristiques principales

Indique les critères de tri possibles. Voir le tableau de configuration.

Attribut	Valeur
High Frequency (range)	85GHz <
Low Frequency (range)	50GHz <= 85GHz

Description produit

The ZV-WRxx calibration kit series provides waveguide calibration standards for system error correction of mmWave network analyzer setups. All common waveguide bands from 50 GHz to 1100 GHz are supported. The calibration kits contain short, offset short and match. Separate models with a sliding match are also available. The sets come with a hex ball driver and hex ball screws.

The calibration kit data are pre-defined on each Rohde & Schwarz vector network analyzer, allowing for straightforward and reliable calibration.

Key Features

Waveguide calibration kit series covering 50 GHz to 1100 GHz

Including match, short, offset short

Optional version including sliding match

Calibration kit parameters pre-installed in R&S®VNAs

Calibration kit versions with sliding match available

Benefits

Single Match Model

There are extra models that include a sliding match.

Using a sliding match instead of a fixed match further increases measurement accuracy.

High Mechanical Stability

Especially with the high-frequency kits, a bare lambda/4 shim standard is very thin, which can result in tensions and bending when connected and in poor accuracy.

To ensure reliable results, the shim standard for some ZV-WRxx kits is designed with an additional offset length to ensure high mechanical stability and reproducible results.

(Please note: The dedicated offset short is a different standard.)

Specifications
ZV-WRx/ZCWMxx Waveguide Calibration Kit
Model Overview
Model	Order Number	Type	Frequency Range	Connector Type	Calibration Standards
ZV-WR02	1314.5550.10	Waveguide Calibration Kit	325 GHz to 500 GHz	WR02	Short Offset Short Match Without sliding Match
ZV-WR03	1307.7300.30	Waveguide Calibration Kit	220 GHz to 325 GHz	WR03	Without sliding match
ZV-WR03	1307.7300.31	Waveguide Calibration Kit	220 GHz to 325 GHz	WR03	With sliding match
ZV-WR05	1307.8106.10	Waveguide Calibration Kit	140 GHz to 220 GHz	WR05	Without sliding match
ZV-WR05	1307.8106.11	Waveguide Calibration Kit	140 GHz to 220 GHz	WR05	With sliding match
ZV-WR06	1311.8807.10	Waveguide Calibration Kit	110 GHz to 170 GHz	WR06	Without sliding match
ZV-WR06	1311.8807.11	Waveguide Calibration Kit	110 GHz to 170 GHz	WR06	With sliding match
ZV-WR08	1307.7900.10	Waveguide Calibration Kit	90 GHz to 140 GHz	WR08	Without sliding match
ZV-WR08	1307.7900.11	Waveguide Calibration Kit	90 GHz to 140 GHz	WR08	With sliding match
ZV-WR10	1307.7100.10	Waveguide Calibration Kit	75 GHz to 110 GHz	WR10	Without sliding match
ZV-WR10	1307.7100.11	Waveguide Calibration Kit	75 GHz to 110 GHz	WR10	With sliding match
ZV-WR12	1307.7700.10	Waveguide Calibration Kit	60 GHz to 90 GHz	WR12	Without sliding match
ZV-WR12	1307.7700.11	Waveguide Calibration Kit	60 GHz to 90 GHz	WR12	With sliding match
ZV-WR15	1307.7500.30	Waveguide Calibration Kit	50 GHz to 75 GHz	WR15	Without sliding match
ZV-WR15	307.7500.31	Waveguide Calibration Kit	50 GHz to 75 GHz	WR15	With sliding match
ZCWM-1092	3628.5699.02	Waveguide Calibration Kit	170 GHz to 260 GHz	WM-1092	Without sliding match
ZCWM-710	1339.4070.02	Waveguide Calibration Kit	260 GHz to 400 GHz	WM-710	Without sliding match
ZCWM-570	1322.3099.10	Waveguide Calibration Kit	330 GHz to 500 GHz	WM-570	Without sliding match
ZCWM-380	1322.3101.02	Waveguide Calibration Kit	500 GHz to 750 GHz	WM-380	Without sliding match
ZCWM-250	1322.3118.02	Waveguide Calibration Kit	750 GHz to 1100 GHz	WM-250	Without sliding match

Aucun résultat ne correspond à votre recherche ?

Nous contacter