You are browsing the CN site. Would you like to be redirected to another country or region to see content and products specific to your location?
US
快速报价: Keysight Technologies S93084B
Keysight Technologies S93084B
Embedded-LO Capability; for PNA and PNA-X Series Network Analyzers
型号
S93084B制造商
Keysight Technologies配置型号包含以下特性:
配置
技术指标
产品总览
资源
让我们为您提供准确的配置
技术指标
请参考资源中的资料文档或查看产品总览。
如果您想了解更多，请 联系，我们的团队将为您提供帮助。
产品总览
The S93084B tunes the network analyzer’s receivers to the output frequency of the converter under test without having to access internal LOs or a common reference signals.
For converters with embedded LOs, this enables measurements of match-corrected conversion loss/gain and absolute group delay (requires S93082B and S93083B), gain compression versus frequency (requires S93086B), intermodulation distortion (requires S93087B), and noise figure (requires S93029B).
| Key Features |
| Enables accurate measurement of relative phase and absolute group delay of a frequency converter with a built-in LO source, without having to access a common reference signal. |
| Quick and simple two-step calibration so you can spend more time measuring your devices. |
| Optimized testing conditions that maximizes throughput without compromising data quality. |
| Specifications | ||
| Application Software⁸ | ||
| Software Overview | ||
| Application Software⁸ | Description | Additional Information |
| S93007B | Automatic fixture removal | -- |
| S93010B | Time domain analysis | -- |
| S93011B | Enhanced Time Domain Analysis with TDR | Provides TDR measurement class. S93010B is a subset of S93011B. |
| S93015B | Real time S-parameter and power measurement uncertainty | Displays the measurement uncertainty dynamically (real-time) on the measurement trace |
| S93025B | Basic pulsed-RF measurements | Includes control of internal pulse generators and provides pulse widths to 200 ns using wideband detection |
| S93026B | Advanced pulsed-RF measurements | Includes control of internal pulse generators and provides pulse widths to 100 ns using wideband detection, and 20 ns using narrowband detection. |
| S93027B⁸ | Add mechanical noise tuner control for noise figure/ parameter measurements | Provides ability to control Maury Microwave's LXI impedance tuners. Requires application software S93029B |
| S93029B | Noise figure measurements with vector correction² | Standard receivers are used if hardware option N524xB-029 is not present |
| S930317B | Phase noise measurement up to 70 GHz | Direct Digital Synthesizer (DDS) source is required. (S/N prefix 6021 or after, or upgraded unit with N52xxBU-2S7 or 4S7) |
| S930321B | Phase noise measurement up to 125 GHz | This is for N5290A/91A or N5292A with N5293AX/95AX frequency extenders configuration. Direct Digital Synthesizer (DDS) source is required on PNA/ PNA-X (S/N prefix 6021 or after, or upgraded unit with N52xxBU-2S7 or 4S7) |
| S930700B⁸ | Modulation distortion, up to 8.5 GHz | Requires test set option 22x or 42x |
| S930701B⁸ | Modulation distortion, up to 13.5 GHz | Requires test set option 22x or 42x |
| S930702B⁸ | Modulation distortion, up to 26.5 GHz | Requires test set option 22x or 42x |
| S930704B⁸ | Modulation distortion, up to 43.5 GHz | Requires test set option 22x or 42x |
| S930705B⁸ | Modulation distortion, up to 50 GHz | Requires test set option 22x or 42x |
| S930707B⁸ | Modulation distortion, up to 70 GHz | Requires test set option 22x or 42x |
| S93080B | Frequency-offset measurements | Provides ability to independently set the frequency of internal sources and receivers, and to configure external sources. This functionality is included withS93029/082/083/084/086/087/089/090x/093/094B |
| S93082B | Scalar mixer/converter measurements | Provides SMC measurement class. S93082B is a subset of S93083B. |
| S93083B | Vector and scalar mixer/converter measurements³ | Provides SMC+Phase and VMC measurement classes |
| S93084B | Embedded-LO capability | Works with S93029/082/083/086/087B |
| S93086B | Gain-compression measurements | -- |
| S93087B | Intermodulation distortion measurements⁴ | -- |
| S93088B | Source phase control | -- |
| S93089B | Differential and I/Q device measurements | Requires a 4-port test set option (4xx) |
| S930900B | Spectrum analysis, up to 8.5 GHz⁵ | -- |
| S930901B | Spectrum analysis, up to 13.5 GHz⁵ | -- |
| S930902B | Spectrum analysis, up to 26.5 GHz ⁵ | -- |
| S930904B | Spectrum analysis, up to 43.5 GHz⁵ | -- |
| S930905B | Spectrum analysis, up to 50 GHz⁵ | -- |
| S930907B | Spectrum analysis, up to 70 GHz⁵ | -- |
| S930909B | Spectrum analysis, up to 90 GHz⁵ | -- |
| S93093B | Spectrum analysis, up to 120 GHz | -- |
| S93094B | Spectrum analysis, beyond 120 GHz | -- |
| S93110B⁸ | Active hot parameters | Export-controlled |
| S93111B⁸ | Active hot parameters | Function-restricted version. The maximum operation is 50 GHz with N5247B |
| S93118B | Fast CW measurements | -- |
| S93460B | True-mode stimulus | Requires a 4-port test set option (4xx) |
| S93551B | N-port measurements⁶ ⁷ | -- |
| S94601B | Device measurement expert (DMX) | -- |
| S94602B | Limit assistant | -- |
Note:
¹ Supported software license types: fixed-perpetual (1FP), transportable-perpetual (1TP), fixed-1-year (1FY), and transportable1-year (1TY) (note: S93093B, S93094B, S93898B, and S94510B have fixed-license types only).
² For N522xB and N5241/42/49B, vector-noise-corrected measurements require an ECal for use as an impedance tuner. For N5244/45/47B with Option 029, an internal tuner is included. Noise calibration requires a power meter when using a standard receiver. When using the low-noise receiver (Option 029), either a power meter or a 346-series noise source is required (Keysight 346C or 346C-K01 recommended). A power meter is required for measuring mixers and converters.
³ A configurable test set is required for VMC measurements to connect a reference mixer, or for SMC+Phase measurements using the comb-generator-based calibration. When ordered with PNA test set Options 200, 210, 400, or 410 (no front-panel jumpers), phase and delay measurements can only by done using SMC+Phase with a calibration mixer.
⁴ S93087B can be used without PNA-X Options 22x or 42x, but external equipment such as a signal generator and a combiner may be required.
⁵ A test set with internal receiver attenuators is recommended to avoid receiver compression when measuring large input signals.
⁶ When ordering a test set, select an appropriate interface kit.
⁷ When configured as a multiport analyzer using S93551B and a multiport test set, the combiner feature of Option 22x or 42x is temporarily disabled. When configured as a standalone analyzer, the combiner feature is enabled.
⁸ PNA-X models only.
资源
文件资料
Keysight PNA and PNA-X Series Microwave Network Analyzers Product Brochure
找不到您要的?
联系方式
