Los modelos configurados tienen las siguientes opciones:
Electrical & Power QualityTransformer and Motor TestingUtilice "Presupuesto Rápido" y nos pondremos en contacto con usted y le cotizaremos para su necesidad exacta.
También puede ponerse en contacto, si lo prefiere, y nuestros expertos podrán orientarlo con la aplicación y la solución de adquisición adecuadas para este producto.
Lo sentimos pero no disponemos actualmente de ninguna información sobre Especificaciones clave para este producto en línea.
Si desea más información, póngase en contacto y un miembro de nuestro equipo le atenderá.
TDX120 TRAX high voltage accessory for measuring capacitance and tan delta/power factor
The TRAX accessory TDX 120 is a fully automatic 12 kV insulation dissipation factor (tan delta / power factor) test set designed for condition assessment of electrical insulation in high voltage apparatus. When connected to the TRAX, a special app is activated that enables the most advanced tan delta / power factor testing on the market.
| Key Features |
| Easy to use with automatic and manual operation |
| Maximum 12 kV and 500 mA output enables measurement on high capacitance objects without the use of an inductor |
| Wide frequency test voltage (1-505 Hz) for DFR measurements |
| Accurate measurement results under high noise conditions as tested to 765 kV substations |
| Lightweight, rugged design |
| Patented built-in individual temperature correction (ITC) eliminates the need for temperature correction tables |
| Benefits |
| The test set uses an internally generated test signal resulting in accurate and clean measurements even in the most severe conditions and in the event power is required from a portable generator. |
| TDX 120 utilizes the groundbreaking Megger innovation ITC (Individual Temperature Correction) to accurately translate tan delta /power factor test results in warm/cold test objects to the reference temperature 20°C. |
| With a maximum output of 500mA @ 12kV the TDX 120 is powerful enough to be able handle high capacitance tests without the use of an external inductor |
| Voltage dependence detection (VDD - Megger innovation) to automatically warn if test object shows signs of power factor voltage dependence and a tip-up test should be performed |
| Wide frequency range test output (1-505Hz) for narrow band DFR measurements |
TDX 120 is fitted with a resistive voltage divider for unparalleled stability and flexibility. Unlike other tan delta tests sets, TDX 120 does not use any internal components with compressed gas meaning that it can be shipped and stored without restrictions and also does not change over time. |
| Specifications | |
| TDX120 | |
| Feature | Parameter |
| Input | AUX Power Input: From TRAX (AUX Power) 0-240 V AC, 1-500Hz AUX Control Input: Power over Ethernet for power supply and communication |
| Output | 0-250 V AC: 1-505 Hz* 0-2 kV AC: 10-505 Hz 0-4 kV AC: 15-505 Hz 0-12 kV AC: 45-70 Hz 500 mA: 30 seconds 300 mA: 4 minutes 200 mA: 30 minutes 100 mA: continuous Note: The power supply capacity can be expanded to 4 A at 12 kV using the optional Resonating Inductor, (Cat. No. 670600-1) |
| Measurements | Voltage: 0 – 12 kV, 0.1 V maximum resolution Current: 0 – 5 A, 0.1 μA maximum resolution The measurement can be corrected to 10kV equivalents. Capacitance: 0 – 100 μF, 0.01 pF maximum resolution Inductance: 6 H – 10 MH, 0.1 mH maximum resolution Power: 0 – 1 MW, 0.1 mW maximum resolution Power Factor: 0-100% (0-1), 0.001% maximum resolution Dissipation Factor: 0-100 (0-10,000%), 0.001% maximum resolution |
Accuracy (Internal Generator) | Capacitance: ±0.5% of reading + 0.1 pF Dissipation Factor: ±0.005%, Ix > 15 μA to 10 mA, Utest > 300V Inductance: ±0.5% of reading + 1 mH Watt Loss: ±1% of reading + 1 mW |
Accuracy (External Generator and Reference) | Capacitance: ±0.05% of reading + 0.1 pF Dissipation Factor: ±0.005%, Ix 15μA to 10mA, Iref > 15μA ±0.02%, Ix > 10 mA, Iref > 15 μA Inductance: ±0.05% of reading + 1 mH Watt Loss: ±1% of reading + 1 mW |
| Noise Immunity | Electrostatic: 15 mA induced noise into any test lead with no loss of measurement accuracy at maximum interference to specimen current of 20:1 |
| Temperature | Operating: -20°C to +55°C -4°F to +131°F Storage & Transport: -40°C to +70°C -40°F to +158°F |
| Humidity | 0% – 95% RH, non-condensing |
| CE Marking | LVD: 2014/35/EU EMC: 2014/30/EU RoHS: 2011/65/EU |
| Classifications and Standards | Vibration: IEC 60 068-2-6 Shock: IEC 60 068-2-27 Transport: ISTA 2A IP Rating: ISTA 2A Instrument only: IP20 Instrument in hard case: IP21 |
| Dimensions | Instrument Only: 480x310x250mm (18.9”x12.2”x 9.8”) excluding handles Soft Case: 690x450x390mm 27x18x15” Hard Case: 690x410x450mm 27x16x18” |
| Weight | Instrument Only: 23kg (51lbs) In Soft Case: 27kg (59lbs) In Hard Case: 35kg (77lbs) |
Note:
* Signals below 45 Hz or above 200 Hz with derating
| Specifications | |
| TDX 120 | |
| Model Overview | |
| Model (Cat. Number) | Description |
TDX 120 (AJ-69090) | TRAX high voltage accessory for measuring capacitance and tan delta/power factor Included Accessories: Aux Power cable, 1 m (3 ft) Ground cable, 1 m (3 ft) Ethernet cable, 1 m (3 ft) Extension cable 10 m (33 ft) High voltage cable, 21 m (66 ft) Measuring cable, 18 m (60 ft), red Measuring cable, 18 m (60 ft), blue TDX transport case Soft backpack for leads/accessories |
| Optional Accessories | |
| GC-31103 | Hand switch interlock, 3 m (10 ft) |
| GC-31150 | Interlock foot switch, 3 m (10 ft) |
| AJ-90030 | TIB 225, indicator box (green/red warning beacon), cable 10 m (30 ft) |
| GC-31055 | TIB extension cable 10 m (33 ft) |
| AJ-90045 | Trolley/cart for TRAX and TDX |
| AG-90100 | Accessory kit |
| 670500-1 | HV reference standard |
| 36610 | HV TTR capacitor, 10 nF, 10 kV |
| 36610-KIT2 | Capacitor kit (TTR cap, 2 ref caps + case) |
| 670600-1 | Resonating inductor |
| 1002-455 | Adapter kit for Megger (670600-1) and competitor’s resonating inductor |
| 670511 | Oil test cell, field model with case |


