You are browsing the FR site. Would you like to be redirected to another country or region to see content and products specific to your location?

Devis Rapide: EXFO FPM302X-FOA-54

EXFO FPM302X-FOA-54

Handheld Optical Power Meter; High-Power Ge Detector, SC (PC/SPC/UPC/APC) Adapter

FPM302X-FOA-54

Network & Fiber Installations

EXFO

Cette configuration a les caractéristiques suivantes:

Network & Fiber InstallationsFiber Optic Power Meters

Configurations

Caractéristiques principales

Description produit

Ressources

Cliquez sur 'Configurez votre produit' et nous vous contacterons pour vous adresser un devis conforme à votre besoin.

Vous pouvez cliquer sur Contactez-moi, si vous préférez, et nos experts vous guideront vers la bonne solution technique et financière.

Automatically uses the proper calibration parameters when combined with the FLS-300 or FOT-300 source units.

Key Features

Highly accurate unit offering 10 calibrated wavelengths and reference values

Power autonomy of 300 hours

Three-year warranty and recommended calibration interval, for dramatically reduced cost of ownership

Ergonomic, eye-catching handheld package

Benefits
Auto Wavelength Recognition	The FLS-300 or FOT-300 units can transmit with a wavelength-identification digital encrypted protocol, enabling the FPM-300 power meter to automatically use the proper calibration parameters. This feature reduces the need for communication between the two technicians and decreases the potential for error.
Distant Referencing	Signal encrypting can also give the receiving end information on the power to be used as reference, helping ensure efficient referencing, even when the two units are far apart.
FTTx Ready	EXFO’s FPM-300 allows for the testing of passive optical networks (PONs) at 1310 nm, 1490 nm and 1550 nm, the three wavelengths recommended by the ITU-T (G.983.3) for PONs.

Specifications
FPM-300 Series - Power Meter Overview
*Model (b)**	FPM-302	FPM-302X
Power Meter Port	Ge	GeX
Power Range (dBm) (*c)	10 to –60	26 to –50
Range Displayed (dBm)	Down to –65	Down to –50
Number of Calibrated Wavelengths (*d)	10	10
Power Uncertainty (*e)	±5% ± 1 nW	±5 % ± 10 nW
Resolution (dB)	0.01 (*f)	*0.01 (g)**
Automatic Offset Nulling (*h)	Yes	Yes
Warm-up Period (min)(* i) (s)	0	0
Display Units	dB, dBm, W	dB, dBm, W
Tone Detection	270 Hz, 1 kHz and 2 kHz	270 Hz, 1 kHz and 2 kHz
Automatic Wavelength Recognition j	Yes	Yes
Screen Refresh Rate (Hz)	3	3
Tone Detection (Hz)	270, 1 k, 2 k	270, 1 k, 2 k
Battery Life (hours) (typical)	> 300	> 300
Warranty and Recommended Recalibration Interval (years)	3	3

Notes:

(*a) Guaranteed unless otherwise specified.

(*b) All specifications valid at 1550 nm and 23 °C ± 1 °C, with an FC connector.

(*c) In CW mode; sensitivity defined as 6 x rms noise level.

(*d) Wavelengths: 830 nm, 850 nm, 980 nm, 1300 nm, 1310 nm, 1450 nm, 1490 nm, 1550 nm, 1590 nm and 1625 nm.

(*e) Traceable to NIST; FPM-302X: up to 20 dBm.

(*f) From 10 dBm to –50 dBm.

(*g) From 26 dBm to –35 dBm.

(*h) Power of > –40 dBm for FPM-302, and of > –25 dBm for FPM-302X.

(*i) For ± 0.05 dB and temperatures of > 18 °C.

(*j) At 850 nm, 1300 nm, 1310 nm, 1490 nm, 1550 nm and 1625 nm; power of > –50 dBm for FPM-302, and of > –40 dBm (typical) for FPM-302X.