T-BERD/MTS 4100-Series MP2 OTDR Modules; For T-BERD/MTS-2000, -4000 V2, -5800 Platforms
The VIAVI MP2 OTDR modules provide the optimum performance that fiber installers and service providers need to install, turn-up and maintain optical network architecture, such as long-haul, metro, PON/FTTH, and wireless backhaul.
The OTDR module’s optical performance, combined with the complete suite of T-BERD/MTS platform testing features, ensures that comprehensive testing is done right the first time.
Key Features:
- Up to 46dB dynamic range and 256,000 acquisition points
- Dual, tri-wavelength versions with 1310/1550/1625 nm or 1650 nm
- Integrated CW light source and optional power meter through the OTDR port
- Ready for SLM and SmartAcq intelligent optical application software
Benefits:
- Affordable high performance OTDR for long-haul and metro high-speed fiber links
- Turns any technician into an instant fiber expert on Smart Link Mapper (SLM) apps
- Instantly detects traffic when connected to live fiber
- Eliminates testing errors due to incorrect setup with SmartTEST
- Characterize FTTH and Passive Optical LAN (POL) with high split counts (typical 1x128)
| Specifications |
|
| 4100-Series MP2 OTDR Modules |
|
| General (Typical at 25º C) |
|
| Weight | approx. 500 g (1.1 lbs) |
| Dimensions (w x h x d) | 128 x 134 x 40 mm (5 x 5.28 x 1.58 in) |
| Laser Safety Class (21 CFR) | Class 1/1M |
| Distance Units | Kilometer, meter, feet and miles |
| Group Index Range | 1.30000 to 1.70000 in 0.00001 steps |
| Number of Data Points | up to 256,000 data points |
| Specifications |
|
| 4100-Series MP2 OTDR Modules |
|
| Distance Measurement (Typical at 25º C) |
|
| Mode | Automatic or dual cursor |
| Display Range | From 0.1 up to 400 km |
| Display Resolution | 1 cm |
| Sampling Resolution | From 4 cm |
| Cursor Resolution | From 1cm |
| Accuracy | ±0.75 m ±sampling resolution ±1.10-5 * x Distance (excluding group index uncertainties) *Time base controller/clock accuracy |
| Specifications |
|
| 4100-Series MP2 OTDR Modules |
|
| Attenuation Measurement (Typical at 25º C) |
|
| Mode | Automatic, manual, 2-point, 5-point and LSA |
| Display Range | 1.25 dB to 55 dB |
| Display Resolution | 0.001 dB |
| Cursor Resolution | From 0.001 dB |
| Linearity | ±0.03 dB/dB |
| Threshold | 0.01 to 5.99 dB in 0.01 dB step |
| Specifications |
|
| 4100-Series MP2 OTDR Modules |
|
| Reflectance/ORL Measurements (Typical at 25º C) |
|
| Mode | Automatic or manual |
| Reflectance Accuracy | ±2 dB |
| Display Resolution | 0.01 dB |
| Threshold | –11 to –99 dB in 1 dB step |
| Specifications |
|
| 4100-Series MP2 OTDR Modules |
|
| 4100MP2 OTDR Modules (Typical at 25º C) |
|
| Wavelength(1) | 1310+/-20nm; 1550+/-20nm; 1625+/-10nm; 1650+/-10nm |
| Dynamic Range(2) | 46/45/44/42 dB |
| Pulsewidth | 3 ns to 20 μs |
| Event Dead Zone(3) | 0.65m |
| Attenuation Dead Zone(4) | 2.5 m |
| Splitter Attenuation Dead Zone(5) | <35 m after a 16 dB splitter loss |
| Power Meter | Calibrated wavelengths: 1310, 1490, 1550, 1625, 1650 nm
Power range: -3 to -55 dBm
Accuracy: +/- 0.5 dB @ -30 dBm
|
| Continuous Wave Light Source | Wavelengths: same as OTDR
Output power(6) : -3.5 dBm Stability:
|
Notes:
(1) Laser at 25°C and measured at 10 μs
(2) The one way difference between the extrapolated backscattering level at the start of the fiber and the RMS (SNR=1) noise level, after 3 minutes averaging and using the largest pulse-width
(3) Measured at ±1.5 dB down from the peak of an unsaturated reflective event using the shortest pulse-width
(4) Measured at ±0.5 dB from the linear regression using a FC/UPC reflectance and using the shortest pulse-width
(5) Measured at 1550 nm using the 100 ns pulse-width
(6) Subtract 3dB when used in modulation mode (270/330/1k/2kHz)
| Specifications |
|
| 4100-Series MP2 OTDR Modules |
|
| Ordering Information |
|
| Part Number | Description |
| 4100MP2 Modules |
|
| E4126MP2-PC/-APC | 1310/1550 nm MP2 OTDR Module |
| E4136MP2-PC/-APC | 1310/1550/1625 nm MP2 OTDR Module |
| E4136FMP2-APC | 1310/1550 nm // Filtered 1625 nm MP2 OTDR Module |
| E4138FMP265-APC | 1310/1550 nm // Filtered 1650 nm MP2 OTDR Module |
| Options |
|
| E41OTDRPM | Power meter option through the OTDR port |
| E41OTDRCR | Calibration report |
| Software Licenses (n=2, 4 or 5 per the TB/MTS platforms chosen) |
|
| ESMARTACQ-nK | Smart Acquisition Software License providing multi-pulses OTDR acquisitions |
| ESMARTLINK-nK | Software license providing optimized linear trace view of fiber under test |
| ESMARTFTTH-nK | FTTH-SLM Software License providing optimized FTTH OTDR mode with SmartAcq capability and SLM icon based map view |
| EPULSE3NS | 3ns pulse width option |
| Universal Optical Connectors |
|
| EUSCADS, EUFCADS, EULCADS, EUSCADS-APC, EULCADS-APC | Connector adapters |
