Rohde & Schwarz RT-ZS60 (1418.7307.02)

Single-ended active probes are used to accurately measure ground-referenced signals.

They precisely measure both high-speed and low-frequency signals for which it is critical that the probe impedance places only a minimal load on the test point.

Rohde&Schwarz offers a variety of models with a maximum bandwidth up to 6 GHz.

Rohde&Schwarz single-ended active probes feature a high input impedance of 1 MΩ, a low input capacitance down to 0.3 pF and noise down to 2 mV (RMS) referenced to the input.

Wide Dynamic Range;

with Additional Offset Compensation

In addition to the wide dynamic range, Rohde&Schwarz single-ended active probes also offer an offset compensation.

As a result, the DC component of the measured signal can be compensated so that the signal components of interest are displayed on the oscilloscope at maximum resolution.

The maximum input voltage of 30 V ensures that the probe is not damaged by overloads.

A low voltage, single-ended probe is typically used for measuring high-speed, ground-referenced signals up to 12 V.

Exceptionally Low Offset and Gain Errors;

Minimal Temperature Drift

Rohde&Schwarz single-ended active probes are characterized by impressively low offset and gain errors.

The minimal gain drift coupled with the offset compensation permits precise measurements – even over extended periods of time and at varying temperatures.

Frequent compensation during the measurement is no longer necessary, simplifying everyday measurement tasks.

±8 V

(±12 V offset compensation)

R&S®ProbeMeter and micro button for instrument control,

Rohde&Schwarz probe interface

±8 V

(±12 V offset compensation)

R&S®ProbeMeter and micro button for instrument control,

Rohde&Schwarz probe interface

±8 V

(±12 V offset compensation)

R&S®ProbeMeter and micro button for instrument control,

Rohde&Schwarz probe interface

±8 V

(±10 V offset compensation)

R&S®ProbeMeter and micro button for instrument control,

Rohde&Schwarz probe interface

Active broadband probes:

single-ended

RT-Zxx

Passive / Active Probes

8.0 GHz Transmission Line Probe, 10:1, 500 Ω, 0.3 pF, 20 V (RMS)

Included:

signal pin, solder-in (50);

ground pin, solder-in (10);

signal pin (2);

ground pin, pogo (2);

signal adapter, square pin (2);

ground adapter, square pin (2);

SMA(f) to BNC(m) adapter;

marker band kit;

accessory box;

carrying case;

operating manual

1.0 GHz active voltage probe, single-ended, 1 MΩ, 0.9 pF, BNC

Included:

spring tip 0.5 mm;

solid tip 0.5 mm;

marker band kit;

ground blade;

ground pin;

L-adapter;

Y-lead adapter;

ground lead, 6 cm;

ground lead, 12 cm;

ground lead, angled, 5 cm;

ground lead, angled, 10 cm;

micro clip (2);

protective cap;

power adapter;

operating manual

1.0 GHz active voltage probe, single-ended, 1 MΩ, 0.8 pF

Include:

R&S®RT-ZA2 accessory set;

R&S®ProbeMeter;

micro button

1.0 GHz active voltage probe, single-ended, 1 MΩ, 0.8 pF

Included:

signal pin (5);

ground pin, pogo (2);

ground pin, solderable, offset (2);

marker band kit;

mini clip (1);

lead 15 cm (5.9 in) (1)

1.5 GHz active voltage probe, single-ended, 1 MΩ, 0.8 pF

Included:

R&S®RT-ZA2 accessory set;

R&S®ProbeMeter; micro button

3.0 GHz active voltage probe, single-ended, 1 MΩ, 0.8 pF

Included:

R&S®RT-ZA2 accessory set;

R&S®ProbeMeter; micro button

6.0 GHz active voltage probe, single-ended, 1 MΩ, 0.3 pF

Included:

R&S®ProbeMeter; micro button

Included:

signal pin, solder-in (100);

ground pin, solder-in (20);

signal pin (5);

ground pin, pogo (5);

signal adapter, square pin (2);

ground adapter, square pin (2);

marker band kit;

mini clip (2);

micro clip (2);

lead 6 cm (2.4 in) (2);

lead 15 cm (5.9 in) (2);

accessory box;

carrying case;

operating manual

RT-Zxx

Differential Probes

and

Power Rail Probes

1.0 GHz active voltage probe, differential, 1 MΩ, 0.6 pF

Included:

R&S®ProbeMeter; micro button

R&S®RT-ZA15 external attenuator

See R&S®RT-ZD20 for additional equipment included

1.5 GHz active voltage probe, differential, 1 MΩ, 0.6 pF

Included:

R&S®ProbeMeter; micro button

Included:

signal pin, solder-in (10);

signal pin, variable spacing (4);

browser adapter;

adapter, square pin (2);

flex adapter, solder-in 4 cm (1.6 in) and 10 cm (3.9 in);

flex adapter, square pin 4 cm (1.6 in) and 10 cm (3.9 in);

lead 6 cm (2.4 in) (2);

lead 15 cm (5.9 in) (1);

mini clip (2);

micro clip (2);

marker band kit;

carrying case;

operating manual

3.0 GHz active voltage probe, differential, 1 MΩ, 0.6 pF

See R&S®RT-ZD20 for equipment included

4.5 GHz active voltage probe, differential, 1 MΩ, 0.4 pF

Included:

R&S®ProbeMeter; micro button

Included:

signal pin, solder-in (100);

socket adapter, variable spacing (2);

browser adapter, rigid (2);

browser adapter, spring loaded (2);

lead 6 cm (2.4 in) (2);

lead 15 cm (5.9 in) (1);

mini clip (2);

micro clip (2);

marker band kit;

carrying case;

operating manual

2.0 GHz power rail probe, 1:1, low noise, 50 kΩ, large offset range ±60 V

Included:

R&S®ProbeMeter;

Included:

SMA extension cable, 1 m (39,4 in) (1),

R&S®RT-ZA26 pigtail cable, 15 cm (5.9 in) (3);

R&S®RT-ZA25 power rail browser kit (1);

solder wire (1);

adhesive pads (7);

marker band kit;

carrying case;

operating manual

4.0 GHz power rail probe, 1:1, low noise, 50 kΩ, large offset range ±60 V

Included:

R&S®ProbeMeter;

Included:

SMA extension cable low loss, 1.05 m (41.3 in) (1),

R&S®RT-ZA26 pigtail cable, 15 cm (5.9 in) (3);

R&S®RT-ZA25 power rail browser kit (1);

solder wire (1);

adhesive pads (7);

marker band kit;

carrying case;

operating manual

RT-Zxx

Modular Probes

1.5 GHz modular probe amplifier, differential, 400 kΩ, multimode

Included:

R&S®ProbeMeter; micro button

Included:

lead 15 cm (5.9 in) (1);

Ag plated wire 0.1 mm (0.04 in) (1);

Ag plated wire 0.2 mm (0.08 in) (1);

solder wire (1);

adhesive pads (7);

solder-in resistor for R&S®RT-ZMA15 (20);

solder lead for R&S®RT-ZMA12/15 (20);

marker band kit;

carrying case;

operating manual

3.0 GHz modular probe amplifier, differential, 400 kΩ, multimode

Included:

R&S®ProbeMeter; micro button

See R&S®RT-ZM15 for additional equipment included

6.0 GHz modular probe amplifier, differential, 400 kΩ, multimode

Included:

R&S®ProbeMeter; micro button

See R&S®RT-ZM15 for additional equipment included

9.0 GHz modular probe amplifier, differential, 400 kΩ, multimode

Included:

R&S®ProbeMeter; micro button

See R&S®RT-ZM15 for additional equipment included

13.0 GHz modular probe amplifier, differential, 400 kΩ, multimode

Included:

R&S®ProbeMeter; micro button

See R&S®RT-ZM15 for additional equipment included

16.0 GHz modular probe amplifier, differential, 400 kΩ, multimode

Included:

R&S®ProbeMeter; micro button

See R&S®RT-ZM15 for additional equipment included