Infiniium S-Series high-definition oscilloscopes incorporate new technology to deliver superior measurements. A 10-bit ADC, low-noise front end, correction filters, vertical scaling support down to 2 mV/division, and a precise time base produce high-fidelity measurements. In addition, its advanced frame and broad range of capability enable the S-Series oscilloscopes to tackle a wide range of test needs.
MATLAB software is available directly from Keysight for making your own custom measurement and analysis routines, user-defined filters or instrument applications.
The DSOS604A S-Series oscilloscopes have 6 GHz of bandwidth, a 15” XGA capacitive touch screen, and a 10-bit analog-to-digital converter.
| KEY FEATURES |
| 6 GHz bandwidth (upgradable) |
| 4 analog channels |
| achieve up to 16 bits of vertical resolution with our advanced system architecture |
| capture a longer signal trace with 20 GSa/s maximum sample rate and 100 Mpts/channel of standard memory |
| get superior signal integrity with an average system effective number of bits (ENOB) of 8.1 bits at full bandwidth |
| gain increased usability with the multi-touch supported 15-inch capacitive touch screen and solid state drive for fast boot and reliability |
| improve your testing with a wide range of protocol, compliance, and analysis software |
| SPECIFICATIONS |
|
|
|
|
|
|
|
| S-Series Overview |
|
|
|
|
|
|
|
| Model (1) | DSOS054A / MSOS054A | DSOS104A / MSOS104A | DSOS204A / MSOS204A | DSOS254A / MSOS254A | DSOS404A / MSOS404A | DSOS604A / MSOS604A | DSOS804A / MSOS804A |
| Bandwidth (BW) | 500 MHz | 1 GHz | 2 GHz | 2.5 GHz | 4 GHz | 6 GHz (4) | 8 GHz (4) |
| 10/90% Rise Time (2) | 860 ps | 430 ps | 215 ps | 172 ps | 107.5 ps | 71.7 ps | 53.8 ps |
| Full BW ENOB (3) | 8.1 | 7.8 | 7.5 | 7.4 | 7.2 | 6.8 | 6.4 |
| Full BW Noise Floor (5) | 74 uV | 90 uV | 120 Uv | 130 uV | 153 uV | 195 uV | 260 uV |
| Sample Rate | 20 GSa/s on
2 channels
10 GSa/s on
4 channels
| 20 GSa/s on
2 channels
10 GSa/s on
4 channels
| 20 GSa/s on
2 channels
10 GSa/s on
4 channels
| 20 GSa/s on
2 channels
10 GSa/s on
4 channels
| 20 GSa/s on
2 channels
10 GSa/s on
4 channels
| 20 GSa/s on
2 channels
10 GSa/s on
4 channels
| 20 GSa/s on
2 channels
10 GSa/s on
4 channels
|
| Standard Memory | 100 Mpts/ch
upgradeable up to 400 Mpts/ch
| 100 Mpts/ch
upgradeable up to 400 Mpts/ch
| 100 Mpts/ch
upgradeable up to 400 Mpts/ch
| 100 Mpts/ch
upgradeable up to 400 Mpts/ch
| 100 Mpts/ch
upgradeable up to 400 Mpts/ch
| 100 Mpts/ch
upgradeable up to 400 Mpts/ch
| 100 Mpts/ch
upgradeable up to 400 Mpts/ch
|
| Vertical Resolution | 10 bits at
full bandwidth
up to
16 bits
in high resolution
| 10 bits at
full bandwidth
up to
16 bits
in high resolution
| 10 bits at
full bandwidth
up to
16 bits
in high resolution
| 10 bits at
full bandwidth
up to
16 bits
in high resolution
| 10 bits at
full bandwidth
up to
16 bits
in high resolution
| 10 bits at
full bandwidth
up to
16 bits
in high resolution
| 10 bits at
full bandwidth
up to
16 bits
in high resolution
|
| RF Noise Density (6) | -160 dBm/Hz | -160 dBm/Hz | -160 dBm/Hz | -160 dBm/Hz | -160 dBm/Hz | -160 dBm/Hz | -160 dBm/Hz |
| SFDR (7) | 72 dB | 72 dB | 72 dB | 72 dB | 72 dB | 72 dB | 72 dB |
| Display Size | 15” XGA Capacitive Touchscreen
VGA
Display Port for External Monitors
| 15” XGA Capacitive Touchscreen
VGA
Display Port for External Monitors
| 15” XGA Capacitive Touchscreen
VGA
Display Port for External Monitors
| 15” XGA Capacitive Touchscreen
VGA
Display Port for External Monitors
| 15” XGA Capacitive Touchscreen
VGA
Display Port for External Monitors
| 15” XGA Capacitive Touchscreen
VGA
Display Port for External Monitors
| 15” XGA Capacitive Touchscreen
VGA
Display Port for External Monitors
|
NOTE:
(1) DSO and MSO models have four analog channels. MSO models include 16 digital channels.
(2) Calculation passed on 0.43/BW.
(3) Measured at full bandwidth without high resolution mode enabled. Typical specification; not warranted.
(4) 6 GHz and 8 GHz only possible when two channels are active. Four channel bandwidth is 4 GHz.
(5) Measured at 2 mV/div at full oscilloscope bandwidth and sample rate, no high resolution.
(6) Tested at 1 mV/div, -38 dBm, 1.0001 GHz CF, 500 kHz span, 3 kHz RBW.
(7) Tested with 1 GHz, 0dBm signal at input, FFT with 3 GHz CF, 5 GHz span, 100 kHz RBW.
| SPECIFICATIONS |
|
|
|
| S - Series Overview |
|
|
|
| Model 1 | Bandwidth | 10/90% rise time 2 | Full Bandwidth ENOB 3 |
| DSOS054A | 500 MHz | 860 ps | 8.1 |
| DSOS104A | 1 GHz | 430 ps | 7.8 |
| DSOS204A | 2 GHz | 215 ps | 7.5 |
| DSOS254A | 2.5 GHz | 172 ps | 7.4 |
| DSOS404A | 4 GHz | 107.5 ps | 7.2 |
| DSOS604A | 6 GHz 4 | 71.7 ps | 6.8 |
| DSOS804A | 8 GHz 4 | 53.8 ps | 6.4 |
NOTE:
1. DSO and MSO models have 4 analog channels. MSO models include 16 digital channels.
2. Calculation passed on 0.43/BW.
3. Measured at full bandwidth without high resolution mode enabled. Typical specification not warranted.
4. 6 GHz and 8 GHz only possible when two channels are active. Four channel bandwidth is 4 GHz.
NOTE:
1. DSO and MSO models have 4 analog channels. MSO models include 16 digital channels.
2. Calculation passed on 0.43/BW.
3. Measured at full bandwidth without high resolution mode enabled. Typical specification not warranted.
4. 6 GHz and 8 GHz only possible when two channels are active. Four channel bandwidth is 4 GHz.
