You are browsing the IT site. Would you like to be redirected to another country or region to see content and products specific to your location?
US
Preventivo Rapido: Anritsu MS2090A
Anritsu MS2090A
Field Master Pro Handheld Spectrum Analyzer
Modello
MS2090AFamiglia di prodotti
RF & Microwave Spectrum AnalyzersProduttore
AnritsuI modelli configurati contengono le seguenti caratteristiche:
RF & Microwave Spectrum AnalyzersSpectrum Analyzers-Hand Held1kHz <= 100kHz50GHz <= 85GHzHandheldConfigurazioni
Specifiche chiave
Panoramica del prodotto
Risorse
Saremo felici di aiutarti a trovare la configurazione esatta
Utilizza "Preventivo rapido" e ti contatteremo per fornirti un preventivo per le tue esigenze.
Puoi anche contattarci, se preferisci, e i nostri esperti ti guideranno a trovare la giusta applicazione e soluzione di acquisto per questo prodotto.
Specifiche chiave
Indica le opzioni disponibili sullo strumento. Consultate la scheda Configurazioni per i dettagli dello strumento
| Attributo | Valore |
|---|---|
| Low Frequency (range) | 1kHz <= 100kHz |
| High Frequency (range) | 50GHz <= 85GHz |
| Form Factor | Handheld |
Panoramica del prodotto
Handheld Spectrum Analyzer delivers the highest continuous frequency coverage and real-time spectrum analysis bandwidth up to 110 MHz to address current and emerging applications
Anritsu’s Field Master Pro MS2090A real time spectrum analyzer delivers performance never previously available in a compact, handheld instrument. With continuous frequency coverage from 9 kHz to 54 GHz, the Field Master Pro MS2090A is specifically designed to meet the test challenges of a full range of other wireless technologies in use today, including: 5G, LTE, wireless backhaul, aerospace/defense, satellite systems, and radar.
The Field Master Pro MS2090A delivers the highest levels of RF performance available in a handheld, touchscreen spectrum analyzer, with a displayed average noise level (DANL) of -164 dBm and Third Order Intercept (TOI) of +20 dBm (typical). This makes measurements such as spectrum clearing, radio alignment, harmonic, and distortion even more accurate than previously possible. For modulation measurements on digital systems, 110 MHz modulation bandwidth coupled with best-in-class phase noise performance maximizes measurement precision, while ±0.5 dB typical amplitude accuracy provides confidence when testing transmitter power and spurious.
Ruggedized for field use, all versions provide a comprehensive range of features to speed and simplify measurement, as well as enhance usability. RTSA spans of 22 MHz to 110 MHz (option dependent) provide capability for cellular interference monitoring to full ISM band signal analysis. In addition to being a full span swept tuned spectrum analyzer, all versions include a spectrogram display that helps monitor the RF spectrum for intermittent or interfering signals. Integrated channel power and occupied bandwidth measurements simplify the measuring and characterizing of common radio transmission. Cable and Antenna line sweep measurements are supported with the addition of the S331P Site Master. IQ data capture of 5G frames enables the capture and saving of IQ data for off-line processing on a PC using standard data analysis tools.
| Key Features |
| 9 kHz to 9/14/20/26.5/32/43.5/54 GHz Models Available |
| DANL: -164 dBm (with preamp) |
| TOI: +20 dBm (typical) |
| Analysis bandwidth: 100 MHz |
| Amp range: DANL to +30 dBm |
| Phase noise at 1 GHz: -110 dBc/Hz @ 100 kHz offset (typical) |
| Demodulation: 5GNR, LTE FDD, RF, and modulation quality plus SSB signal analysis |
| Resolution bandwidth (RBW): 1 Hz to 10 MHz |
| RTSA bandwidth: 22, 55, 110 MHz (option dependent) |
| Amplitude accuracy: < 14 GHz ± 1.3 dB (± 0.5 dB, typical) |
| Zero span with 60 ns minimum span |
| IQ capture and streaming |
| Applications | |
| Interference Hunting and Spectrum Clearing | fast sweep speeds a low distortion front-end and the Real Time spectrum analyzer combine to quickly identify interfering signals. A special interference finder option adds AM/FM demodulation with audio output plus interfering source triangulation on a digital map to pinpoint and identify the location and source of interference. |
| Broadcast Transmitter Analysis | a comprehensive range of transmitter measurements Including: Harmonic Spurious Occupied Bandwidth Channel Power Adjacent Channel Power (ensures conformity to regulatory requirements) |
| Microwave Radio Links | with a frequency option up to 54 GHz and exceptional sensitivity for dish alignment, power and modulation bandwidth can be verified during installation or maintenance testing with a waveguide horn antenna. |
| Satellite System Monitoring | ideal for monitoring downlink signals to search for interference and noise |
| Pulse Radar Measurements | The wide bandwidth of the MS2090A enables detailed analysis of pulsed radar signals. In zero span, resolution bandwidth can be set as high as 40 MHz (option dependent), enabling a sweep time as low as 60 ns and amplitude measurements of pulses as narrow as 20 ns. |
| 5GNR Base Station Measurement | validate the performance of the gNB base station with essential measurements that are in full compliance with 3GPP TS 38.104 V15. Including: Frequency error Time offset Cell/sector ID SSB: RSRP, RSRQ, SINR Modulation quality Unwanted emissions Occupied bandwidth Adjacent channel leakage ratio Transmitter harmonics and spurious EIRP |
| 5G Coverage Mapping | receive a clear representation of the signal strength of 5G transmitters over intended geographic area by continuously measuring RF data. including: 5G channel power EIRP, or RSRP – with results graphically displayed on a digital map or building floor plan. |
| Cable and Antenna Measurements | Line sweep RF cables and antennas at base station locations with accessory S331P Site Master |
| Specifications | |
| MS2090A Field Master Pro | |
| Features | Parameters |
| Frequency Range | MS2090A-0709 9 kHz to 9 GHz MS2090A-0714 9 kHz to 14 GHz MS2090A-0720 9 kHz to 20 GHz MS2090A-0726 9 kHz to 26.5 GHz MS2090A-0732 9 kHz to 32 GHz MS2090A-0743 9 kHz to 43.5 GHz MS2090A-0754 9 kHz to 54 GHz |
| DANL (w/preamp) | -164 dBm |
| TOI | +20 dBm |
| Analysis Bandwidth | 100 MHz |
| Demodulation | 5GNR, LTE FDD, RF, and modulation quality plus SSB signal analysis |
| Amplitude Range | DANL to +30 dBm |
| Phase Noise at 1 GHz | -110 dBc/Hz @ 100 kHz offset (typical) |
| Resolution Bandwidth (RBW) | 1 Hz to 10 MHz |
| Input SWR | 1.5 |
| Amplitude Accuracy | < 14 GHz ±1.3 dB (±0.5 dB typical) |
| RTSA Bandwidth | 22, 55, 110 MHz (option dependent) |
| Specifications | |
| MS2090A Field Master Pro Options | |
| Option Overview | |
| Model / Option | Description |
| MS2090A-0709 | 9 kHz to 9 GHz |
| MS2090A-0714 | 9 kHz to 14 GHz |
| MS2090A-0720 | 9 kHz to 20 GHz |
| MS2090A-0726 | 9 kHz to 26.5 GHz |
| MS2090A-0732 | 9 kHz to 32 GHz |
| MS2090A-0743 | 9 kHz to 43.5 GHz |
| MS2090A-0754 | 9 kHz to 54 GHz |
| MS2090A-0006 | Remove WiFi and Bluetooth |
| MS2090A-0024 | Interference Finder |
| MS2090A-0090 | Gated Sweep |
| MS2090A-0031 | GPS Receiver (Requires GPS Antenna, sold separately) |
| MS2090A-0089 | Zero span IF output |
| MS2090A-0103 | 50 MHz analysis bandwidth |
| MS2090A-0104 | 100 MHz analysis bandwidth |
| MS2090A-0124 | IQ Waveform Capture |
| MS2090A-0125 | IQ Waveform Streaming (requires option 124) |
| MS2090A-0126 | IQ Waveform Capture (non export controlled) |
| MS2090A-0127 | IQ Waveform Streaming (non export controlled, requires Option 126) |
| MS2090A-0128 | Vector Signal Analysis Enabled (requires option 124 or 126) |
| MS2090A-0199 | Real-time spectrum analyzer |
| MS2090A-0400 | Vision Monitor Enabled |
| MS2090A-0407 | High-Speed Port Scanner |
| MS2090A-0421 | Pulse Analyzer |
| MS2090A-0444 | EMF Measurement (SPA mode, frequency selective; requires Anritsu Isotropic Antenna) |
| MS2090A-0445 | EMF Meter Enabled (Broadband EMF measurements from 20 MHz to 40 GHz with the 2000-1985-R Isotropic EMF Probe) |
| MS2090A-0883 | LTE FDD Measurements (requires Option 31) |
| MS2090A-0888 | 5G NR downlink measurements (requires Option 31) |
| MS2090A-xxxx-097 | Accredited calibration to ISO17025 and ANSI/NCSL Z540-1 (xxxx is the frequency option number) |
| MS2090A-xxxx-098 | Standard calibration to ISO17025 and ANSI/NCSL Z540-1 (xxxx is the frequency option number) |
| MS2090A-xxxx-099 | Premium calibration to ISO17025 and ANSI/NCSL Z540-1 plus test data (xxxx is the frequency option number) |
Non riesci a trovare quello che cerchi?
Contattaci
