Provides extremely low input capacitance, flat frequency response, and patented resistor probe tip technology
For high-speed differential or single-ended probing in embedded designs, the InfiniiMax 5 GHz 1132B differential probe amplifier is a perfect complement to Infiniium 4 GHz oscilloscopes. Its extremely low input capacitance, flat frequency response and patented resistor probe tip technology provide ultra-low loading of the DUT and superior signal fidelity.
The InfiniiMax 1130B-34B Series supports a wide variety of real-world applications with an extensive line up of probe heads and accessories. The accessories can meet the most demanding mechanical access requirements.
| Specifications |
|
| 1132B InfiniiMax Probe |
|
| Features | Parameters |
| Bandwidth: | 5 GHz |
| Range: | Dynamic Range: +/- 2.5V
DC Offset Range: +/- 12V when using probe offset
Maximum Voltage: +/- 30V
|
| Input Impedance: | Differential Input R: 50 kOhm
Differential Input C: 0.27-0.34 pF
Single Ended Input R: 25 kOhm
Single Ended Input C: 0.44-0.67 pF
|
| Specifications |
|
|
|
|
|
|
|
|
High-Frequency
Differential Active Probes
(< 10 GHz)
|
|
|
|
|
|
|
|
|
| Model Overview |
|
|
|
|
|
|
|
|
| Model | Bandwidth | Input
Range
| Probe
Offset
| Diff Input
Impedance
| Attenuation
Ratio
| Prob-to-scope
Interface
| Power
Source
| Oscilloscope
Termination
|
| N2792A | 200 MHz | ±20 V | N/A | 1 MΩ/3.5 pF | 10:1 | BNC | USB cable or battery | 50 Ω |
| N2818A | 200 MHz | ±20 V | N/A | 1 MΩ/3.5 pF | 10:1 | AutoProbe1 | Oscilloscope | 50 Ω |
| N2793A | 800 MHz | ±15 V | N/A | 200 kΩ/1.0 pF | 10:1 | BNC | USB cable or battery | 50 Ω |
| N2819A | 800 MHz | ±15 V | N/A | 200 kΩ/1.0 pF | 10:1 | AutoProbe1 | Oscilloscope | 50 Ω |
| N2750A | 1.5 GHz | ±5 V | ±15 V | 100 kΩ/0.7 pF | 2:1/10:11 | AutoProbe1 | Oscilloscope | 50 Ω |
| N2751A | 3.5 GHz | ±5 V
| ±15 V | 100 kΩ/0.7 pF | 2:1/10:11 | AutoProbe1 | Oscilloscope | 50 Ω |
| N2752A | 6.0 GHz | ±5 V | ±15 V | 100 kΩ/0.7 pF | 2:1/10:11 | AutoProbe1 | Oscilloscope | 50 Ω |
| 1130B2 | 1.5 GHz | ±2.5 V | ±12 V | 50 kΩ/0.27 pF | 10:1 | AutoProbe1 | Oscilloscope | 50 Ω |
1131B2
| 3.5 GHz | ±2.5 V | ±12 V | 50 kΩ/0.27 pF | 10:1 | AutoProbe1 | Oscilloscope | 50 Ω |
| 1132B2 | 6.0 GHz | ±2.5 V | ±12 V | 50 kΩ/0.27 pF | 10:1 | AutoProbe1 | Oscilloscope | 50 Ω |
| 1134B2 | 7.0 GHz | ±2.5 V | ±12 V | 50 kΩ/0.27 pF | 10:1 | AutoProbe1 | Oscilloscope | 50 Ω |
| N2830A2,3 | 4 GHz | ±2.5 V | ±16 V | 100 kΩ/0.32 pF | 5:1/10:11 | AutoProbe1 | Oscilloscope | 50 Ω |
| N2831A2,3 | 8 GHz | ±2.5 V | ±16 V | 100 kΩ/0.32 pF
| 5:1/10:11 | AutoProbe1 | Oscilloscope | 50 Ω |
| N7000A2 | 8 GHz | ±2.5 V | ±16 V | 100 kΩ/0.32 pF | 5:1/10:11 | AutoProbe2 | Oscilloscope | 50 Ω |
Notes:
¹ Auto-selected based on V/division setting.
² Requires differential probe head sold separately.
³ Not compatible with InfiniiVision X-Series oscilloscopes, but is compatible with the Infiniium UXR (1 mm & 1.85 mm models) with the cascaded use of the N5442A and N2852A adapters.
