Home >> Products >> KT-N5225A-401
 
Keysight Technologies (formerly Agilent) N5225A-401
Other Configurations. Call our experienced Sales Staff.
 

Keysight Technologies (formerly Agilent) N5225A-401

10MHz-50GHz 4-Port PNA Microwave Network Analyzer dual source, with configurable test set

 
browse
View Data Sheet PDF icon
Part NumberIncluded Options
Rent/Lease   Buy Used
KT-N5225A-401 
KT-N5225A-401/118/551/SW1/Fast CW Mode/N-port calibrated sw/28/80/83/84/86/87
KT-N5225A-401/118/551/SW1/W7X/Fast CW Mode/N-port calibrated sw/28/80/83/84/86/87/Windows 7 OS
KT-N5225A-401/80/83/WXP/Frequency offset/Vector & scalar cal conv/Windows XP OS
KT-N5225A-401/W7X/Windows 7 OS
Catalog Description

Keysight Technologies (formerly Agilent) N5225A-401

10 MHz to 50 GHz 4-Port PNA Microwave Network Analyzer dual source, with
configurable test set

Features:
4 port integrated S-parameter test with single source;
Wide dynamic range: >127dB dynamic range at test port (typical) above 500MHz;
131 dB receiver dynamic range 32,001 points, 32 channels, 15MHz IF bandwidth;
High output power: (+13dBm) and a wide power sweep range (38dB);
Low noise floor: -114dBm at 10Hz IF bandwidth;

Interfaces:
10.4 inch XGA color LCD, touch screen;
Code compatible to the E series PNA Network analyzers;
RF connector type 2.4mm (m), 50ohm;
4 USB on Front panel 2.0 compatible;
VGA video output;
Built in Handler I/O, LAN, USB, GPIB interfaces and Peripheral ports on rear;

                               
Option requirements:
Option 7 requires Windows 7
Option 8 requires option 25
Option 22 not available on 2 port series models
Option 82 requires option 80 and is a subset of option 83
Option 83 requires option 80
Option 84 requires one option 28,82,83,86,or 87
Option 87 not available on KT-N524xA-400
Option 87 requires option 80
Option 88 not available on KT-N524xA-200
Option 460 not available on KT-N524xA-200 series models
Option 551 not available on KT-N524xA-400


Compatible cables/cal kits:
 KT-85056A 2.4mm Standard calibration kit
 KT-85056D 2.4mm Economy calibration kit
 KT-85133F 2.4mm Flexible test port cable set 24.5 inches each
 GORE-85133F 2.4mm Flexible test port cable set 24.5 inches each
 KT-85134F Flexible cable set for 3.5mm-2.4mm (one male, one female)
 GORE-85134F Flexible cable set for 3.5mm-2.4mm (one male, one female)

 KT-N4693A/00F 10MHz-50GHz ECal module female-female
 KT-N4693A/M0F 10MHz-50GHz ECal module male-female


ER defined bundles:

SW1 is a bundle of:
28 Noise figure measurements using standard receivers
80 Frequency Offset Measurements
83 Vector and scalar calibrated converter measurements
84 Embedded LO measurements
86 Gain compression application
87 Intermodulation distortion measurements



LengthWidthHeightShip Wt 
20 " 17 " 10 " 117 lb  
    
N/A Currently not available for sale used
Need Configuration Assistance? Call our experienced Sales Staff.