Megger 510836-1 MGR-510836-1 Neon Phasing Tester/Hot Stick
Nominal System Voltage Range, 50/60 Hz (phase to phase): 4.16 to 34.5 kV
Pole Length: 43 in. (1092 mm)
Cable Length between Poles 54 in. (1372 mm)
Provides continuous monitoring with no on/off switch.
They respond to minimum phase-to-ground voltages as
outlined by ANSI C84.1 standards, with conformance to
IEC guidelines for capacitive high-voltage test instruments.
The Phasing Tester provides bright LED indication for
easy visibility indoors or where lighting conditions
are poor. Approximate voltage ranges to be checked can
be preset for additional assurance. The instrument
consists of a pair of fixed-length, 43-in. (1092-mm)
poles with hand guards. A flexible, insulated
connecting cable is capable of covering a 7-ft (2.1-m)
span between two energized phases under test.
These two-pole phasing testers may be used on grounded
and ungrounded ac systems to check high-voltage fuses,
test for correct phase connections and test for the absence
of high voltage on de-energized lines or apparatus.
FEATURES AND BENEFITS
Used on grounded or ungrounded ac systems to check
high-voltage fuses, test for correct phase connections
and test for the absence of high voltage on de-energized
lines or apparatus.