Home >> Products >> MGR-SMRT36D-P1
Megger SMRT36D-P1
Other Configurations. Call our experienced Sales Staff.

Megger SMRT36D-P1

3 Phase Relay Tester

View Data Sheet PDF icon
Part NumberIncluded Options
Rent/Lease   Buy Used
Catalog Description

Megger SMRT36D-P1

 MGR-SMRT36D-P1 3 Phase Relay Tester

New Integrated Smart Touch View Interface (STVI)
Multi-colored graphics with intuitive navigation
Enhanced dynamic test capabilities
Built-in test report generator
New high current output - 60 Amps at 300 VA per phase
Improved low current accuracy . currents below 100 mA
New convertible voltage channels . 15 Amps at 120 VA
Dynamic, Transient and GPS Satellite Synchronized End-to-End Testing
IEC 61850 Testing Capability

The SMRT36D is a multipurpose, light-weight, field portable test set capable
of testing a wide variety of
electro-mechanical, solid-state and microprocessor-based protective relays,
small molded case circuit breakers, motor overload relays and similar
protective devices.

The unit can be operated either manually via the built-in touchscreen
user interface, or placed under full computer control via the AVTS,
Advanced Visual Testing Software, or the STVI software running on a PC.

The built-in user interface, called the Smart Touch-View Interface (STVI),
is Meggers second generation of automatic/semi-automatic
manual user interface software. It incorporates a large,
easy to read Full Color high resolution, high definition, TFT LCD touch-screen
display, which displays metered values such as AC and DC Amperes,
AC and DC Volts, and Time in both seconds and cycles.
Depending on the type of test selected,
other values may be displayed, such as Phase Angle, Frequency, Ohms, Watts,
VA, or Power Factor.

Each current channel is rated for 30 Amps @ 200 VA continuous, up to 60 Amps @
300 VA for short durations. It has a flat power curve from 4 to 30 Amps that
insures maximum compliance voltage to load at all times. Three currents in
parallel provide up to 180 Amps @ 900VA for instantaneous tests. With a
compliance voltage of 50 Volts per phase, with just two channels in series
provides 100 Volts of compliance voltage to test high impedance relays.

Each voltage channel can provide variable outputs of 0- 30/150/ 300 Volts at
150 VA of output power, and has a flat power curve from 30 to 150 Volts
insuring maximum output power to the load at all times. With the voltage
channel converted to current, a three channel unit can provide 6 currents for
testing three phase current differential relays, including harmonic restraint
transformer differential relays.

3 phase relay tester includes:
I/O and Battery Simulator, with the STVI-1, with grounded common returns.
no returns, no Bluetooth, no IEC61850

Universal Input Voltage Operation from 90 to 264 Vac, 50/60 Hz

Operate with or without computer, (60 Amps/300 VA rms) per phase

Standard Enclosure with test leads

ER's P1 bundle includes MGR PN 1001-632 Hard-Sided Transit Case

Configured with:
3 = 3 current modules
P = Plus Binary I/O and Battery Simulator
2 = SMRT36D unit with built-in STVI touchscreen display
G = Grounded Common Returns
0 = no Bluetooth
A = North America Power Cord
0 = no IEC61850 GOOSE
S = Standard Field Enclosure
1 = Test Leads

LengthWidthHeightShip Wt 
10.75 " 13.25 " 6.75 " 60 lb  
N/A Currently not available for sale used
Need Configuration Assistance? Call our experienced Sales Staff.