Home >> Products >> OMI-CIBANO-500
Other Configurations. Call our experienced Sales Staff.

OMICRON Electronics CIBANO-500

Medium and High-voltage Circuit Breaker Tester

Part NumberIncluded Options
Rent/Lease   Buy Used
OMI-CIBANO-500/Z0900/911/912/QTY.3 CB-MC2 UPGRAGE OPT/QTY.3 Adptr/dig.tran/DOB/QTY.3 Adptr/dig.tran/VANG
Catalog Description

OMICRON Electronics CIBANO-500

3-in-1 test system for medium- and high-voltage circuit breakers

The CIBANO 500 circuit breaker test system combines a micro-ohmmeter, timing
analyzer, and a coil and motor supply in a single device. This enables all
important circuit breaker tests to be carried out even when a station battery
is not available.
With the 3-in-1 system all types of circuit breakers (medium- and high-voltage
circuit breakers with live and dead tank design) can be tested. It features a
globally unique connection technology which considerably reduces the wiring
effort and time required. In addition, OMICRON's Primary Test Manager Software
(PTM) ensures convenient operation and delivers one clear, combined report for
all the tests performed.
The innovative accessories can be used to extend the scope of testing as well
as increase convenience and safety during testing.

Key Features
3-in-1 system: micro-ohmmeter, timing analyzer, and AC/DC power supply
One system for medium or high-voltage circuit breakers with live or dead tank
Low wiring effort
One clear report for all tests
Lightweight test system (20 kg / 44.1 lbs)

The following 5 standard tests can be carried out on all circuit breakers
using CIBANO 500:
Static contact resistance test (micro-ohm measurement)
Timing tests
Coil and motor current analysis
Minimum pick-up test
Undervoltage condition test

Option VEHZ0900 includes Qty.3 CB-MC2 Contact module:

In combination with CIBANO 500, the CB MC2 contact module increases
convenience and safety during testing. It also expands the scope of testing by
adding the dynamic contact resistance test, which detects wear-related
problems with main and arcing contacts.
The innovative and clearly structured connection concept means that all tests
can be carried out without the need for rewiring. The circuit breaker can be
grounded on both sides to prevent dangerous voltages on the equipment.
One or more CB MC2 contact modules are directly attached to the interrupter
units. This keeps the high-current cables as short as possible minimizing the
test set-up time. Interference is considerably reduced thanks to the digital
connection to CIBANO 500.

Key features
Dynamic contact resistance test
High-current cables kept as short as possible (weight reduction)
Low interference due to the digital connection to CIBANO 500
Fast test set-up and reduced risk of wiring errors

With the configuration CIBANO500 and
3 CB MC2 you can perform all tests
on 3-phase circuit breakers, with one or
two interrupters, without any rewiring

Output specifications
Frequency DC / 15 Hz ... 400 Hz

Vmains P30S P2H
> 100 V 1500 W 1000 W
> 190 V 3200 W 2400 W

PC Requirements
Operating system

Windows 8 64-bit
Windows 7 32-bit and 64-bit
Windows XP with SP 3
CPU Pentium
2 GHz or faster
RAM min. 2 GB
Hard disk min. 2GB of available space
Storage device DVD drive
Graphics adapter Super VGA (1280 768) or
higher-resolution video adapter and
monitor min.
Interface Ethernet NIC
Necessary Microsoft
software solution
Microsoft Office 2010, Office 2007,
or Office 2003

Dead Tank Package Includes:
1 CIBANO 500 with auxiliary module
1 CB TN3
1 PTM software
1 Static contact resistance license
1 Timing license
1 Motion license
1 Dynamic contact resistance license
1 Current clamp license
1 Minimum pick-up license
1 Motor current license
1 Battery clamp set: 3 red, 3 black (4 mm connector)
8 Crocodile clamp 4 mm connector (4 red + 4 black)
2 Kelvin clamp (3 x 4 mm connector red, 1 x 4 mm connector black)

LengthWidthHeightShip Wt 
9 " 22.9 " 15 " 60 lb  
N/A Currently not available for sale used
Need Configuration Assistance? Call our experienced Sales Staff.