Home >> Products >> RS-FSV30
Rohde & Schwarz FSV30
Other Configurations. Call our experienced Sales Staff.

Rohde & Schwarz FSV30

10Hz-30GHz Signal Anlyzer

View Data Sheet PDF icon
Part NumberIncluded Options
Rent/Lease   Buy Used
RS-FSV30/B14/K10/Ultra High precision refe/GSM/EDGE/EDGE Evolution
RS-FSV30/B14/K14/K54/Ultra High precision refe/Spectrogram measurement/EMI application
RS-FSV30/B14/K9/K40/Ultra High precision refe/Power sensor measurement/Phase noise measurement
RS-FSV30/B24/B25/K30/K40/9k-30GHz Preamplifier/Electronic attenuator,1dB/Noise figure and gain me/Phase noise measurement
RS-FSV30/B4/K40/K70/SW1/OCXO, precision freq ref/Phase noise measurement/Vector signal analysis/K7/K73/K83/K85/K91/K101
RS-FSV30/B4/K8/K70/K91/K93/N1/OCXO, precision freq ref/Bluetooth/EDR measurement/Vector signal analysis/WLAN 802.11a,b,g,j analys/Wimax 802.16 SISO analysi/K30/K40
RS-FSV30/B5/B70/K7/Additional interfaces/40MHz signal analysis bw/Analog modulation analys
Catalog Description

Rohde & Schwarz FSV30

10 Hz to 30 GHz Signal and Spectrum Analyzer

Analysis software: GSM/EDGE, WCDMA/HSPA, LTE, WiMAX, WLAN, analog modulation
Support of power sensors from the NRP family with option K9;

Resolution Bandwidth 1 Hz to 10 MHz in 1/2/3/5 sequence
Analysis bandwidth: 28 MHz standard, 40 MHz with option B70;
Third order intercept (TOI): +13dBm
SSB phase noise at 10 kHz offset -106 dBc; at 100 kHz offset -115 dBc

Displayed average noise level (DANL):
-149 dBm (1Hz) at 3.6 GHz without preamp
-144 dBm (1Hz) at 15-30 GHz without preamp

RF input connector: 3.5mm female
USB interface 2 ports, type A plug, version 2.0
LAN interface 10/100/1000BaseT RJ-45
AC supply: 100V to 240V, 3A to 1.25A;
50Hz to 400Hz, class of protection I in line with VDE 411

Hardware Options:
B4 OCXO Reference Frequency
B5 Additional I/O (IF out, video out, AUX port, trigger out, 2 x USB)
B8 Resolution Bandwidth > 10 MHz
B9 Tracking generator 100 kHz to 7 GHz
B10 External Generator Control
B13 High-pass Filter for Harmonic Measurements
B17 Digital Baseband Interface
B18 8 GB Solid State Drive - Removable
B21 LO/IF Ports for External Mixers
B24 RF Preamplifier (100 kHz to 26.5 GHz)
B25 Electronic Attenuator, 1 dB steps
B33 USB Mass Memory Write Protection
B70 40 MHz Analysis Bandwidth

Software Options:
K6 Pulse Measurements
K7 Analog modulation analysis for AM, FM, PM
K10 GSM / EDGE / EDGE Evolution / VAMOS Measurements
K17 Multicarrier Group Delay Measurements
K30 Noise Figure and Gain Measurements
K40 Phase Noise Measurement
K54 EMI Measurement Application
K70 Vector Signal Analysis
K72 Analysis of 3GPP FDD Base Station Signals incl. HSPA+
K73 3GPP-FDD UE analysis incl. HSPA
K76 3GGP TD-SCDMA BTS Measurements
K77 TD-SCDMA UE Measurements
K82 CDMA2000 Base Station measurement application
K83 CDMA2000 MS measurement application
K84 1xEV-DO Base Station measurement application
K85 1xEV-DO MS measurement application
K91 WLAN 802.11a,b,g,j analysis
K91N WLAN 802.11n analysis
K100 Analysis of EUTRA/LTE FDD downlink signals
K101 Analysis of EUTRA/LTE FDD uplink signals
K103 EUTRA/LTE Uplink MIMO application - requires K100 or K104
K104 EUTRA/LTE TDD Downlink Signals application

External harmonic mixers require option B21
RS-FS-Z60 40 GHz to 60 GHz Harmonic Mixer
 RS-FS-Z75 50 GHz to 75 GHz Harmonic Mixer
 RS-FS-Z90 60 GHz to 90 GHz Harmonic Mixer
 RS-FS-Z110 75 GHz to 110 GHz Harmonic Mixer

Electro Rent defined bundles:

Option N1 is a bundle of:
K30 Noise figure and gain measurements
K40 Phase noise measurements

Option SW1 is a bundle of:
K7 Analog modulation analysis for AM, FM, PM
K73 3GPP-FDD UE analysis incl. HSPA
K83 CDMA2000 MS measurement application
K85 1xEV-DO MS measurement application
K91 Analysis of WLAN 802.11a,b,g,j signals
K101 Analysis of EUTRA/LTE FDD uplink signals

LengthWidthHeightShip Wt 
16.42 " 16.22 " 7.76 " 53 lb  
N/A Currently not available for sale used
Need Configuration Assistance? Call our experienced Sales Staff.