Home >> Products >> RS-FSVA30
Other Configurations. Call our experienced Sales Staff.

Rohde & Schwarz FSVA30

10Hz-30GHz Signal Analyzer

Part NumberIncluded Options
Rent/Lease   Buy Used
Catalog Description

Rohde & Schwarz FSVA30

10 Hz to 30 GHz Signal and Spectrum Analyzer
* Up to 160 MHz signal analysis bandwidth
* 0.4 dB level measurement uncertainty up to 7 GHz
* Low displayed average noise level (DANL: typ. 168 dBm (1 Hz) )
* High third-order intercept (TOI: typ. 20 dBm)
* Very low phase noise (e.g. typ. 118 dBc (1 Hz) at 1 GHz and 10 kHz offset)
* General-purpose measurement applications for phase noise, noise figure,
vector signal analysis, analog demodulation, EMI diagnostics
* Wireless measurement applications for LTE (including LTE-Advanced),
WLAN (including IEEE802.11ac), WCDMA/HSPA+, TD-SCDMA, GSM/EDGE,
CDMA2000/1xEV-DO, Bluetooth
* Frequency range up to 500 GHz with harmonic mixers
* Removable solid state or hard disk drives
* Support of power sensors from the NRP family with option K9

* Resolution Bandwidth 1 Hz to 10 MHz in 1/2/3/5 sequence
* Analysis bandwidth: 28 MHz standard, 40 MHz with option B70;
Third order intercept (TOI): +20 dBm
* SSB phase noise at 100 kHz offset -90 dBc (1 Hz)

Displayed average noise level (DANL):
-147 dBm (1Hz) at 3 GHz without preamp
-144 dBm (1Hz) at 15-34 GHz without preamp
-162 dBm (1Hz) at 3 GHz with preamp
-159 dBm (1Hz) at 15-34 GHz with preamp

N(male), K(male), 2.4mm(female)
USB interface 2 ports, type A plug, version 2.0
LAN interface 10/100/1000BaseT RJ-45
AC supply: 100V to 240V, 3A to 1.25A;
50Hz to 400Hz, class of protection I in line with VDE 411

Hardware Options:
B1 Ruggedized Housing
B3 AM/FM Audio Demodulator
B4 OCXO Reference Frequency
B5 Additional I/O (IF out, video out, AUX port, trigger out, 2 x USB)
B9 Tracking generator 100 kHz to 7 GHz
B10 External Generator Control
B11 YIG Preselector Bypass
B14 Ultra-High Precision Frequency Reference
B17 Digital Baseband Interface
B18 8 GB Solid State Drive - Removable
B21 LO/IF Ports for External Mixers
B22 RF Preamplifier (9 kHz to 7 GHz)
B24 RF Preamplifier (9 kHz to 40 GHz)
B25 Electronic Attenuator, 1 dB steps
B30 DC Power Supply for 12V supply voltage
B33 USB Mass Memory Write-Protection
B40 40 MHz Analysis Bandwidth
B160 160 MHz Analysis Bandwidth

Option B1, B11, B21, B24, and B33 are not retro-fittable.

Software Options:
K7 Analog modulation analysis for AM, FM, PM
K8 Bluetooth / EDR Measurements
K9 Power Sensor Measurements
K10 Analysis of GSM, EDGE and EDGE Evolution Signals
K14 Spectrogram Measurements
K30 Noise Figure and Gain Measurements
K40 Phase Noise Measurement
K54 EMI Measurement Application
K70 Vector Signal Analysis
K72 Analysis of 3GPP FDD Base Station Signals incl. HSPA+
K73 3GPP-FDD UE analysis incl. HSPA
K76 3GGP TD-SCDMA BTS Measurements
K77 TD-SCDMA UE Measurements
K82 CDMA2000 Base Station measurement application
K83 CDMA2000 MS measurement application
K84 1xEV-DO Base Station measurement application
K85 1xEV-DO MS measurement application
K91 WLAN 802.11a,b,g,j analysis
K91AC WLAN 802.11ac Measurement Application
K91N WLAN 802.11n analysis
K91P WLAN 802.11p Measurement Application
K100 Analysis of EUTRA/LTE FDD downlink signals
K101 Analysis of EUTRA/LTE FDD uplink signals
K102 EUTRA/LTE Downlink MIMO application - requires K100 or K104
K103 EUTRA/LTE Uplink MIMO application - requires K100 or K104
K104 EUTRA/LTE TDD Downlink Signals application
K105 EUTRA/LTE TDD Uplink Signals application

External harmonic mixers require option B21
RS-FS-Z60 40GHz to 60GHz Harmonic Mixer
 RS-FS-Z75 50GHz to 75GHz Harmonic Mixer
 RS-FS-Z90 60GHz to 90GHz Harmonic Mixer
 RS-FS-Z110 75GHz to 110GHz Harmonic Mixer

LengthWidthHeightShip Wt 
16 " 16 " 7.7 " 44 lb  
N/A Currently not available for sale used
Need Configuration Assistance? Call our experienced Sales Staff.