Duplex connect concentric handspike with sprung loaded potential tip fitted with a connector socket for easy connection to any connector test lead.
The C connection is made via an outer hardened and tempered steel crown with two contact points or tips.
The replaceable central potential probe tip has a hardened needle point, gold plated for excellent low resistance contact. The P tip is sprung to provide 1.3kg of force and uses a stainless steel spring.
Ideal for general applications where a good reliable connection is required on none coated or corroded surfaces. The long probe length and small diameter makes this probe ideal for reaching deeply recessed terminal screws. There are also applications where connection to rivet heads or screw/bolt heads are required. To further limit the possibility of damage to test piece waffle tip, sometimes referred to a serrated tip is available as an option.
| Specifications |
|
CP1-C
Concentric Duplex Connect Probe
|
|
| Features | Parameters |
| Maximum Current Rating | 10 A |
| Connector to Probe Tip Resistance | 10 m ohm |
| Probe Tip Spacing | Between two outer C tips: 7.6 mm
P tip central between two C tips with 3.8 mm spacing
|
| Probe Dimensions | From finger guard to tip: 110 mm
Diameter is tapered from 14 mm nearest the finger guard to 11 mm at tip crown
|
| Will Fit | Any duplex connect test lead and extension lead |
| Safety | <30 V only |
| Specifications |
|
|
| Duplex Connect Test Leads |
|
|
| Test Lead Overview |
|
|
| Cat. No. | Description | Length |
| Duplex Connect Test Leads |
|
|
| 1006-442 | Connect Duplex Handspike lead set 3m (x2) for BT51 | 10 ft. (3 m) |
| 1006-443 | Connect Duplex Handspike lead set 6m (x1) for BT51 | 20 ft. (6 m) |
| 1006-444 | Duplex hand spikes | 4 ft. (1.2 m) |
| 1006-445 | Duplex hand spikes | 8 ft. (2.5 m) |
| 1006-446 | Duplex hand spikes | 4 ft. (1.2 m) |
| 1006-456 | Connect test leads with indicator light | 5 ft. (1.5 m) |
| 1006-458 | Connect test leads with indicator light | 10 ft (3 m) |
| 1006-459 | Connect test leads with indicator light | 20 ft. (6 m) |
| 1006-452 | Connect test lead without indicator light | 5 ft. (1.5 m) |
| 1006-454 | Connect test lead without indicator light | 10 ft (3 m) |
| 1006-455 | Connect test lead without indicator light | 20 ft. (6 m) |
| 1007-023 | Connect test leads for BT51 | 10 ft (3 m) |
| 1007-024 | Connect test leads for BT51 | 20 ft. (6 m) |
| 1006-460 | Connect extension lead | 20 ft. (6 m) |
| 1006-450 | Duplex connect probe | Probe |
| 1006-449 | Duplex connect twist probe | Probe |
| 1006-448 | Concentric duplex connect probe | Probe |
| 1006-447 | Heavy duty kelvin clip | Clip |
| 1006-451 | Insulated connect Kelvin Clip | Clip |
| 1006-462 | Connect kelvin clip lead set (x2) | 10 ft (3 m) |
| 1006-461 | Connect insulated kelvin clip lead set (x2) | 10 ft (3 m) |
