You are browsing the CN site. Would you like to be redirected to another country or region to see content and products specific to your location?
US
快速报价: Keysight Technologies CX1205A
Keysight Technologies CX1205A
Sensor Head: Test Lead Adapter
型号
CX1205A产品类别
LCR / Impedance Analyzers制造商
Keysight Technologies配置型号包含以下特性:
LCR / Impedance AnalyzersSemiconductor Test Equipment配置
产品总览
资源
让我们为您提供准确的配置
产品总览
The CX1205A Sensor Head provides two mini jack terminals for ammeter + and - terminals of a CX3300 analog channel through a current sensor. Furnished test leads can be used for connecting the mini plug (pin) on DUT directly. This is convenient when the DUT or its test board has test pins to measure current. The maximum bandwidth will be limited compared to the SMA type sensor heads.
| KEY FEATURES |
| Quick current measurement from 40 nA to 1 A |
| Using a pair of test leads by connecting them to the mini jack terminals |
| 5 test leads are included |
| SPECIFICATIONS | |
Model: CX12xxA Series Overview (Sensor Heads for CX1101A and CX1102A) | |
| Model | Description |
| CX1201A Sensor Head; Coaxial through | CX1201A has two SMA connectors for connecting ammeter + and − terminals to a source instrument and DUT. Maximum current: 1 A. Input: SMA jack connectors |
| CX1202A Sensor Head; Coaxial through with V Monitor | CX1202A has two SMA connectors for connecting ammeter + and − terminals to a source instrument and DUT. Also has an SMA connector for monitoring voltage. Maximum current: 1 A. Input: SMA jack connectors |
| CX1203A Sensor Head; Coaxial Termination | CX1203A has an SMA connector for connecting ammeter + and − terminals to DUT. Also has a built-in series resistor, 50 Ω. Maximum current: 1 A with 0 Ω, 70 mA with 50 Ω series resistor. Input: SMA jack connector (center: +, outer: −). |
| CX1204A Sensor Head; Twisted Pair Adapter | CX1204A is a sensor head with extension cables (shielded, twisted pair, 100 mm, or 300 mm) for soldering the DUT. Maximum current: 1 A. |
| CX1205A Sensor Head; Test Lead Adapter | CX1205A has two minijack terminals for connecting ammeter + and − terminals to DUT. Maximum current: 1 A. Input: Minijack terminals. |
CX1206A Sensor Head; Test Lead Adapter (for CX1101A only) | CX1206A expands the maximum measurement current of CX1101A up to 10 A. It has two banana jack terminals for connecting ammeter + and − terminals to DUT. Maximum current: 10 A. Input: Banana jack terminals. |
| SPECIFICATIONS | |
| CX11xx Sensor and Accessories Overview | |
| Model - Option | Description |
| CURRENT SENSOR | |
| CX1101A | Current sensor, single channel, ±40 V, 100 MHz, 40 nA – 1 A |
| CX1101A-A6J | ANZI Z540-1-1994 calibration |
| CX1101A-UK6 | Commercial calibration certificate with test data |
| CX1102A | Current sensor, dual channel, ±12 V, 100 MHz, 40 nA - 1 A |
| CX1102A-A6J | ANZI Z540-1-1994 calibration |
| CX1102A-UK6 | Commercial calibration certificate with test data |
| CX1103A | Current sensor, low-side, 200 MHz, 150 pA - 20 mA |
| CX1103A-A6J | ANZI Z540-1-1994 calibration |
| CX1103A-UK6 | Commercial calibration certificate with test data |
| CX1104A | Current sensor, selectable resistive sensor head, ±40 V, 20 MHz |
| CX1104A-A6J | ANZI Z540-1-1994 calibration |
| CX1104A-UK6 | Commercial calibration certificate with test data |
| CURRENT AND VOLTAGE SENSOR | |
| CX1105A | Differential sensor, single channel, 100 MHz |
| CX1105A-A6J | ANZI Z540-1-1994 calibration |
| CX1105A-UK6 | Commercial calibration certificate with test data |
| VOLTAGE SENSOR | |
| CX1151A | Passive probe interface adapter |
| CX1151A-A6J | ANZI Z540-1-1994 calibration |
| CX1151A-UK6 | Commercial calibration certificate with test data |
| DIGITAL CHANNEL | |
| CX1152A | Digital channel, 10 input, ±25 V, 8-channels |
| ACCESSORIES | |
| CX1903A | Rackmount kit for CX3300 series |
| CX1905B | Attachment for 3D probe positioner |
| SPECIFICATIONS | |
| Model: CX3322A Device Current Waveform Analyzer Overview | |
| Model - Option | Description |
| MAINFRAME | |
| CX3322A | Device Current Waveform Analyzer, 1 GSa/s, 14/16-bit, 2 Channel |
| BANDWIDTH OPTION | |
| CX3322A-B05 | Bandwidth – 50 MHz |
| CX3322A-B10 | Bandwidth – 100 MHz |
| CX3322A-B20 | Bandwidth – 200 MHz |
| MEMORY SIZE | |
| CX3322A-004 | Memory – 4 Mpts/ch |
| CX3322A-016 | Memory – 16 Mpts/ch |
| CX3322A-064 | Memory – 64 Mpts/ch |
| CX3322A-256 | Memory – 256 Mpts/ch |
| DATA LOGGER MODE | |
| CX3322A-STG | Data logger mode option |
| CALIBRATION | |
| CX3322A-A6J | ANZI Z540-1-1994 calibration |
| CX3322A-UK6 | Commercial calibration certificate with test data |
| PERIPHERALS | |
| CX3300A-KBD | Mini keyboard and optical mouse |
| SPECIFICATIONS | |
| Model: CX3324A Device Current Waveform Analyzer Overview | |
| Model - Option | Description |
| MAINFRAME | |
| CX3324A | Device Current Waveform Analyzer, 1 GSa/s, 14/16-bit, 4 Channel |
| BANDWIDTH OPTION | |
| CX3324A-B05 | Bandwidth – 50 MHz |
| CX3324A-B10 | Bandwidth – 100 MHz |
| CX3324A-B20 | Bandwidth – 200 MHz |
| MEMORY SIZE | |
| CX3324A-004 | Memory – 4 Mpts/ch |
| CX3324A-016 | Memory – 16 Mpts/ch |
| CX3324A-064 | Memory – 64 Mpts/ch |
| CX3324A-256 | Memory – 256 Mpts/ch |
| DATA LOGGER MODE | |
| CX3324A-STG | Data logger mode option |
| CALIBRATION | |
| CX3324A-A6J | ANZI Z540-1-1994 calibration |
| CX3324A-UK6 | Commercial calibration certificate with test data |
| PERIPHERALS | |
| CX3300A-KBD | Mini keyboard and optical mouse |
找不到您要的?
联系方式
