Tektronix TF-BRR-CFD

Key Features:

• Facilitates BroadR-Reach, P802.3bw 100BASE-T1 and P802.3bp 1000BASE-T1 distortion tests, as well as P802.3bp 1000BASE-T1 PAM test 
• Produces two identical clock signal outputs phase locked to the input clock 
• SMA connector clock input, AC-coupled, 50 Ohm terminated, 50mVpp-5Vpp 
• Supports input clock frequencies of 10 MHz, 25 MHz, 66.66667 MHz, 125 MHz and 750 MHz (+/-1.1%), switch controlled 
• Testpoint access for oscilloscope observation of the input clock 
• Input clock 200 Hz low-pass jitter-rejection filter 
• Output frequency equals the input clock frequency divided by 1, 5/2, 20/3, 25/2 or 75, per input frequency selection (nominally 10 MHz output for the above-cited input frequencies) 
• BNC connector clock output, AC-coupled, 50 Ohm back-terminated, 3.0, 3.3 or 4.2Vpp (50% less when far-end terminated), output amplitude jumper controlled 
• Individual-buffer-produced or shared-buffer-produced outputs, jumper controlled 
• LEDs flash yellow for error conditions (including USB power input voltage out of range) or green for warnings (including loss of frequency lock) 
• USB powered, requiring 4.5V-5.5V @ 450 mA 
• Can support input frequencies between 64 KHz and 2 GHz 
• Can support output frequencies between 2 KHz and 200 MHz