The M980xA PXIe Vector Network Analyzer (VNA) meets the most demanding multiport challenges with exceptional measurement performance and a fast cycle time so you can do more in less time. Gain deeper insights into your devices with the widest available portfolio of measurement applications for PXI VNAs, including spectrum analysis, noise figure measurements, and more.
The M980xA Series offers the performance required for testing passive components, amplifiers, mixers or frequency converters. It provides best-in-class key PXI VNA specifications such as dynamic range, measurement speed, trace noise and temperature stability. Each module is a completely independent vector network analyzer with 2-, 4- or 6-ports up to 20 GHz, or 2-ports up to 53 GHz. The modules are easily configured as a true multiport VNA by using additional modules installed in the same chassis, and a VNA with up to 50-ports can be configured in a single chassis for multiport applications. All test ports are fully synchronous, so multiple ports can be measured simultaneously with multiport error correction applied.
The M980xA utilizes the same measurement science as other Keysight VNAs such as the PNA, ENA and Keysight Streamline Series VNA. A common software platform makes it easy to choose the right level of performance to match budget and measurement needs. This commonality guarantees measurement consistency, repeatability, and a common remote-programming interface across multiple instruments in R&D and manufacturing.
| Key Features |
| Cascade multiple modules for up to 50 ports of multiport or multi-site measurement on a single chassis |
| Make accurate multiport measurements with N-port correction capability |
| Perform fast and easy multiport calibration with electronic calibration (ECal) modules |
| Choose from a wide range of measurement application to gain deeper insight into your RF test |
| Features the same intuitive GUI as Keysight’s high-performance network analyzers |
| Specifications |
|
| Features | Parameters |
| Maximum Frequency | 20 GHz |
| Minimum Frequency | 9 kHz |
| SA Start Frequency | 9 kHz |
| System Dynamic Range | > 140 dB |
| Output Power | 10 dBm |
| Number of Built-In Ports | 2, 4, or 6 ports |
| Harmonics | -25 dBc (Typical) |
| Best Speed at 201 Point, 1 Sweep | 1.3 msec |
| Instrument Type | PXI |
| Applications | S-Parameters
Signal Integrity
Balance Measurements
|
| Components | Cables
Antennas
Mixers/Frequency Converters
Filters/Duplexers
Amplifiers
Connectors
Isolators
|
| System Features | LO In/Out ports for extending the number of ports |
| DANL @1 GHz | -150 dBm/Hz (Typical) |
| Phase Noise @1 GHz (1 MHz offset) | -128 dBc/Hz (Typical) |
| Phase Noise @1 GHz (10 kHz offset) | -103 dBc/Hz (Typical) |
| Modular | Yes |
| Temperature Stability | 0.005 dB/ ⁰C (Typical) |
| Weight | 540 g (2-pt) to 1.17 kg (6-pt) |
| Specifications |
|
M980xA Series
PXIe Vector Network Analyzer
|
|
| Model Overview |
|
| Model | Description |
| M9800A | 9 kHz to 4.5 GHz, 2/4/6-port |
| M9801A | 9 kHz to 6.5 GHz, 2/4/6-port |
| M9802A | 9 kHz to 9 GHz, 2/4/6-port |
| M9803A | 9 kHz to 14 GHz, 2/4/6-port |
| M9804A | 9 kHz to 20 GHz, 2/4/6-port |
| M9805A | 100 kHz to 26.5 GHz, 2-port |
| M9806A | 100 kHz to 32 GHz, 2-port |
| M9807A | 100 kHz to 44 GHz, 2-port |
| M9808A | 100 kHz to 53 GHz, 2-port |
