You are browsing the LATIN_EN site. Would you like to be redirected to another country or region to see content and products specific to your location?
Configured models contain the following attributes:CableAntenna & PIM AnalyzersPIM Testers
Please use 'Get Quick Quote' and we’ll contact you and quote for your exact need.
You can also get in touch, if you prefer, and our experts will be able to guide you with the right application and procurement solution for this product.
Please refer to the Resources section for Datasheets or see the Product Overview.
If you would like to know more, please get in touch and one of our team will be happy to help.
The iPA Series Passive Intermodulation (PIM) analyzer is the first battery powered PIM Test Analyzer versatile enough to support multiple test scenarios such as testing at the top of the tower, base of tower, roof top and in-building for DAS systems. This IEC compliant 20W, rugged, battery operated design can be operated via remote control with any WiFi enabled phone, tablet or laptop computer. This allows hands-free dynamic testing that is safe and convenient. Add the optional Range to Fault (RTF) module to quickly identify the location of PIM and Return Loss sources. Evolved from a design legacy of field proven analyzers, this PIM Analyzer enables network operators to improve site performance by finding and eliminating sources of passive intermodulation at the cell site. An intuitive touch screen interface is also available for local control, performing tests and quickly generating site reports.
|Rugged and reliable; designed with tower climbers in mind
|Fully configurable frequencies, powers and IM products
|Remote control possible with handheld device, eg tablet, cell phone
|Simple to operate touch screen interface
|Extensive reporting capabilities
|Spectrum monitor, frequency sweep and time trace modes
|Two models available A Series 0.1 to 20W, D Series 1W to 40W
|Reverse (reflected) PIM, 3rd and 5th order. (iPA-2100A 3rd, 5th and 7th order)
|< -117dBm/-160dBc maximum (<-125dBm/-168dBc typical) at 2 x 20W
|1x RF output (7-16 DIN female), 1x USB 2.0 Host, 1x USB 2.0 Slave, 1x SD
1x monitor port (SMB female), 1x SMA-RP (Wi-Fi external antenna)
|Local - touch screen display 4.3in (109mm)
Remote - tablet, computer, any Wi-Fi enabled user device with web browser
|Return Loss Alarm
|Automatic detection and shut down when high RL is detected
|See model table
|± 5ppm maximum, aging ± 1ppm maximum after first year
|Power Per Tone (adjustable)
|All A series Models 0.1 to 20W (+20 to +43dBm in 1dB increments)
iPA-0600D 100mW to 40W (+20 to +46dBm in 1dB increments)
iPA-0707D 1 to 40W (+30 to +46dBm in 1dB increments)
|Power Accuracy (per tone)
|± 0.5dB maximum
|Receive Band (100kHz steps)
|See model table
|Measurement Noise Floor
|-50dBm to -128dBm
|25.9 VDC, 2600 mAh, 67Wh Lithium Ion battery packs (removable)
|Battery Operating Time
|Depends on usage, 2 hr minimum per battery pack
|Output: 29.4 VDC, 1.2 Amp
|Dimensions H x D x W
|369 x 160 x 240mm | 14.5 x 6.3 x 9.4in
|12kg | 26lbs
|-10ºC to +45ºC | +14°F to +113°F
|IP54. IP67 when enclosed in optional hard case
|5% to 95% RH non-condensing
|Storage Temperature Range
|-10°C to +60°C | +14°F to +140°F
|40G shock rating
|RX Range (PIM)
|RTF Module *
|Dual Band PCS/AWS
|UMTS (3rd & 7th)
Notes: Specifications subject to change without notice.
WARNING: Use of the portable PIM analyzer in a radiating mode, for example when connected to an antenna not enclosed in an anechoic environment, may be a violation of licensing regulations. Users should obtain permission in advance from any licensed operators that might be affected by these tests. Furthermore, radiating high RF power can pose a personnel risk.