A wide variety of optical, electrical, and accessory modules support your specific testing requirements.
The Tektronix 80C00 optical sampling modules, when installed in DSA8300 Digital Serial Analyzer sampling oscilloscopes¹, provide complete optical test solutions for telecom (125 Mb/s to 44.50 Gb/s) and datacom (gigabit Ethernet, 10 GbE, 40 GbE, 50G/100G/200G/400G Ethernet, Fibre Channel, and InfiniBand) applications, as well as general-purpose optical component testing.
Other module features include an optical-to-electrical converter, average power monitor, one or more reference receiver filters, a full bandwidth optical path, optional integrated clock recovery², optional electrical clock recovery signal pickoff³ , and a universal optical input connector.
Notes:
¹ Also compatible with DSA8200, TDS/CSA8200, TDS/CSA8000B, and TDS/CSA8000 sampling oscilloscopes.
² 80C07B, 80C08D, and 80C11B modules.
³ 80C10C (with opt. CRTP), 80C12B, 80C14, 80C15, 80C17, and 80C18 modules.
| Key Features |
| Optical modules that support optical data rates from 155 Mb/s to 10 Gb/s to 40 Gb/s to 100 Gb/s to PAM4 for 50G/100G/200G/400G |
| Optical reference receivers (ORR)³ support specified requirements for standards-mandated compliance testing |
| High optical sensitivity, low noise, and wide dynamic range of the optical sampling modules allows accurate testing and characterization of short-reach to long-haul optical communications standards |
| Fully calibrated clock recovery solutions – no need to manually calibrate for data pick-off losses |
| Calibrated extinction ratio measurements and variable correction ER measurement ensure accuracy and repeatability |
Note:
³ Optical Reference Receiver (ORR) is a 4th-order Bessel-Thompson filter, with a frequency response and tolerances as defined by the standards. Tektronix optimizes the response for best nominal fit and highest quality mask test results.
| Specifications |
|
80C00 Optical Modules;
for DSA8300 Sampling Oscilloscope
|
|
| Model Overview |
|
| Models | Description |
| 80C07B | Multirate datacom and telecom optical sampling module |
| 80C08D | Multirate, broad wavelength, high sensitivity 10 Gb/s |
| 80C10C | Multirate datacom and telecom 25 Gb/s, 40 Gb/s, and 100 Gb/s |
| 80C11B | Multirate, 10 Gb/s datacom and telecom |
| 80C12B | Multirate, broad wavelength, high sensitivity datacom and telecom |
| 80C14 | Multirate, high sensitivity datacom and telecom 10 Gb/s and 14 Gb/s |
| 80C15 | Single/multi-mode, multirate datacom and telecom 25 Gb/s and 100 Gb/s |
| 80C17 | Single channel, single/multi-mode, multirate datacom and telecom 25 Gb/s, 100 Gb/s, and PAM4 for 50G/100G/200G/400G |
| 80C18 | Dual channel, single/multi-mode, multirate datacom and telecom 25 Gb/s, 100 Gb/s, and PAM4 for 50G/100G/200G/400G |
| 80C20 | Single channel, single-mode, multirate datacom and telecom 25 Gb/s, 40 Gb/s, 100 Gb/s, and PAM4 for 200G/400G |
| 80C21 | Dual channel, single-mode, multirate datacom and telecom 25 Gb/s, 40 Gb/s, 100 Gb/s, and PAM4 for 200G/400G |
| Specifications |
|
| DSA8300 Series |
|
| Model Overview |
|
| Model | Description |
| DSA8300 | Digital Serial Analyzer Sampling Oscilloscope |
| Optical Modules |
|
| 80C07B | 2.5 GHz single-mode and multi-mode,
Amplified (750 to 1650 nm) optical module for multirate datacom and telecom applications w/ optional integrated clock recovery
|
| 80C08D | 9 GHz optical channel; single-mode and multi-mode,
Amplified (750 to 1650 nm) optical module optimized for 8.5 to 12.5 Gb/s applications with optional integrated clock recovery
|
| 80C10C | 55/70/80 GHz;
Single-mode (1290 to 1330 nm and 1520 to 1620 nm) optical module with reference receiver* filters for multirate datacom and telecom 40 Gb/s and 100 Gb/s (4 × 25 Gb/s) and PAM4 50G/100G/200G/400G at 25+GBd and 53+GBd applications with optional calibrated trigger pick-off for use with external clock recovery instruments
(such as the CR286A)
|
| 80C11B | 30 GHz;
Single-mode (100 to 1650 nm) optical module with reference receiver* filters for 8.5 to 14.1 Gb/s telecom and datacom standards.
Optional, integrated clock recovery for 8.5 to 12.6 Gb/s applications
|
Note:
* Optical Reference Receiver (ORR) is a 4th-order Bessel-Thompson filter, with a nominal response and other details defined by standards. Details of the definition differ; Tektronix optimizes the response for best nominal fit and highest quality mask test results.
