Tektronix TIVP1

IsoVu technology uses power-over-fiber and an optical analog signal path for complete galvanic isolation between the measurement system and your DUT.

By allowing the probe to float independently at the common mode voltage, isolation provides important advantages.

▪ 160 dB (100 million to 1) CMRR at DC

▪ Up to 120 dB (1 million to 1) CMRR at 100 MHz

▪ Up to 80 dB (10,000 to 1) CMRR at 1 GHz

▪ ±60 kV Common Mode Voltage range

▪ Up to ±2500 V differential input Voltage range

▪ Up to ±2500 V offset range

With traditional differential probes you had to choose between high bandwidth or high voltage levels.

IsoVu probes, with their shielded coaxial cable and isolation, provide high bandwidth and a differential voltage range of ±2500 V. IsoVu Gen 2 offers bandwidths of 200 MHz, 500 MHz, and 1 GHz.

IsoVu probe tips have a range of connections and accessories that offer high performance and accessibility.

The probes can connect directly to MMCX connectors, which are inexpensive and widely-available.

This makes for stable, hands-free test points and offer high bandwidth and common mode rejection.

The solid metal body shields the center conductor and minimizes ground loop area for the lowest interference possible.

Other accessories are available to adapt the probe tips to a wide range of connections.

Additional 0.100" and 0.200" spaced square-pin tips are available for applications that require greater than ±250V differential voltage.

When not using a tip, the sensor head has 1 MΩ and 50Ω switchable termination at the probe's SMA connector.

This feature effectively adds an isolated channel to any compatible oscilloscope.

Making high-side measurements in half-bridge power converters is challenging because the source or collector to which the measurements are referenced is slewing rapidly up and down.

Wide bandgap devices like SiC and GaN FETs are even harder to measure because they can switch high voltages in a few nanoseconds.

Noise from this rapidly changing common mode voltage leaks into the differential measurements and hides details on VGS and VDS.

IsoVu probes have unmatched common mode rejection at full bandwidth that lets you see signal details, often for the first time.

TIVP1, TIVP05, TIVP02

Isolated Measurement Systems

DC: 160dB

100 MHz: 100 dB

200 MHz: 100 dB

DC: 160dB

100 MHz: 100 dB

200 MHz: 100 dB

DC: 160dB

100 MHz: 100 dB

200 MHz: 100 dB

DC: 160dB

100 MHz: 100 dB

200 MHz: 100 dB

DC: 160dB

100 MHz: 100 dB

200 MHz: 100 dB

DC: 160dB

100 MHz: 100 dB

200 MHz: 100 dB

IsoVu carrying case for 2 m cable models;

Soft case (with foam insert) protects the TIVP and enforces the optical fiber minimum bend radius

IsoVu carrying case for 10 m cable models;

Soft case (with foam insert) protects the TIVP and enforces the optical fiber minimum bend radius

SMA wrench/driver tool; 5/16"

Wrench for use on SMA connector

Probe tip adapter;

Adapt an MMCX IsoVu tip to standard 0.100" spaced, 0.025" square pins

Probe bipod for probe;

TIVP can rotate in holder to accommodate square pin headers

MMCX probe tip;

MMCX tip is recommended for the best bandwidth and CMRR performance