The LinkRunner AT Network AutoTester offers user-configured AutoTests for a wide range of important tasks. This network tester’s quick cable test and switch identification facilitate fast problem isolation.
The LinkRunner AT Network Tester is a rugged, fast, and complete copper and fiber Ethernet network connectivity tester. It performs an essential set of network connectivity tests, enabling you to quickly and accurately identify and solve network connectivity problems.
| Key Features |
| Fiber support |
| TruePower™ PoE Power Test up to 30W |
| IPv6 support |
| Reflector support |
| More reports: 50 instead of 10 |
| Uses Li-ION rechargeable battery instead of an AA battery pack |
| These exclusive features cannot be added to the LinkRunner AT 1000. |
| Specifications |
|
LinkRunner AT
Network AutoTester
|
|
| Feature | Parameter |
| Dimensions | 3.5 in x 7.8 in x 1.9 in
8.9 cm x 19.8 cm x 4.8 cm
|
| Weight | 18 oz
0.5 kg
|
| Battery | Removable, rechargeable lithium-ion battery pack
(18.5 Watt-hrs)
|
| Battery Life | Typical operating life is 6 hours
Typical charge time is 3 hours
|
| External AC Adapter/Charger | AC input 90 to 264V AC 48 to 62 Hz input power DC output 15V DC at 1.2 Amps |
| Display | 2.8 in color LCD
(320 x 240 pixels)
|
| Keypad | 12-key elastomeric |
| Tone Generator | IntelliTone™
Digital Tone: [500 KHz]
Analog Tones: [400 Hz, 1 KHz]
|
| Media Access; Copper | RJ-45: 10BASE-T, 100BASE-TX, 1000BASE-T and PoE (IEEE 802.3af and 802.3at) |
| Media Access; Fiber | SFP Adapter Port supports 100BASE-FX and 1000BASE-LX/ SX/ZX (LRAT-2000 Only) |
| Cable Tests | Pair lengths opens, shorts, splits, crossed, straight through, and cable ID |
| Power over Ethernet (PoE) | Single-ended testing:
User-defined testing to IEEE 802.3at class 0, 1, 2, 3, 4 without LLDP negation, or 4 with LLDP negotiation
The following PSE PoE parameters are measured:
Pairs used
Received class
PSE type
Unloaded voltage(V)
Loaded voltage (V) (LRAT-2000 with TruePower™)
Unloaded power (W) (LRAT-1000)
Loaded power (W) (LRAT-2000 with TruePower™)
|
| Supporting Operating Systems | Windows® 8.1 and Windows® 10
Minimum hardware requirement:
Processor: 1 GHz or better CPU
RAM: 1 GB or more
Hard Disk: 1 MB available space
Display: 1024 x 768 high color, 32-bit (recommended)
Interface: USB
|
| Specifications |
|
LinkRunner AT
Network AutoTester
|
|
| Feature | Parameter |
| Operating Temperature and Relative Humidity | 32°F to 113°F
0°C to +45°C
Note: The battery will not charge if the internal temperature of the tester is above 113°F (45°C)
|
Operating Relative Humidity
(% RH without condensation)
| 90% (50°F to 95°F; 10°C to 35°C)
75% (95°F to 113°F; 35°C to 45°C)
|
| Storage Temperature | -4°F to 140°F
-20°C to +60°C
|
| Shock and Vibration | Random, 2 g
5 Hz-500 Hz (Class 2) 1 m drop
|
| Safety | EN 61010-1 2nd edition |
| Safety (LR-AT 2000 only) | EN/IEC 60825-1:2007, EN/IEC 60825-2:2004+ A1:2007 (LRAT- 2000 only) |
| Altitude | 4,000 m
Storage: 12,000 m
|
| EMC | FCC Part 15 Class A, EN 61326-1 |
| Certifications and Compliance | Conforms to relevant European Union directives
Conforms to relevant Australian standards
Listed by the Canadian Standards Association
|
