Keysight Technologies N6153EM0D

DVB-T, DVB-H, and DVB-T2 (Version 1.1.1, 1.2.1, and 1.3.1) standards; DVB-T2 option supports Mode A (single PLP) and Mode B (multi-PLP), SISO and MISO, and DVB-T2-Lite measurements

Transmitter, modulator, gap-filler or SFN network RF measurement, analog baseband measurements with PXA BBIQ or MXA BBIQ hardware

One-button measurements with pass/fail per the standard, plus auto detection

Runs inside PXA, MXA, and EXA signal analyzers

Power measurement: channel power, shoulder attenuation, ACP, CCDF, spurious emission, SEM

Modulation accuracy measurement: constellation, TPS decoding (DVB-T), L1-signaling (DVB-T2), MER/EVM (MER RMS/peak, MER by subcarriers, MER by data, and pilot), BER, frequency error, amplitude error, phase error, phase jitter, quadrature error, amplitude imbalance, carrier suppression, MER monitoring

Channel frequency response and channel impulse response (supports SFN test for pre-, post-, 0 dB, and out-of-GI range echo scenarios)

Auto-detection or manual settings of the DVB-T, DVB-H, DVB-T2, or DVB-T2-Lite signal; provides advanced settings such as equalization switch, payload type, demodulation symbols, out-of-band filtering, clock rate, and BER count

Power accuracy: up to ±0.19 dB (95^th percentile)

Shoulder attenuation dynamic range: up to 97.8 dB (102.8 dB typical)

MER floor: up to 50 dB (2K mode and 64QAM with EQ off for DVB-T); up to 51 dB (32K mode, 256 QAM, Constellation rotation Yes with EQ Off for DVB-T2)

Analysis bandwidth: PXA/MXA up to 160 MHz; EXA up to 40 MHz (Options PC4 and DP2 are recommended to improve DVB-T2 modulation accuracy measurement speed)