快速報價: EM Test PFM 200N100.1

+886 701 0152 200需要幫忙？請與我們的專家聯繫

EM Test PFM 200N100.1

Power Fail Simulator; DUT Current 100 mA to 100 A

型號

PFM 200N100.1

產品類別

Power Quality & Electrical Test

製造商

EM Test

配置型號包含以下特性:

Power Quality & Electrical TestEMC Test Equipment264V

配置

技术指标

產品總覽

資源

讓我們為您提供準確的配置

請使用“獲取快速報價”，我們將根據您的需求與您聯繫並報價。

您也可以選擇保持聯繫，我們會為您提供正確的應用和採購解決方案。

特性	參數
Maximum Voltage	264V

產品總覽

The PFM 200N100.1 and PFM 200N200 have been designed to fully meet the requirements for E10, E13 and E14 of the LV 124 and the E48-09 of the LV 148. It also allows to perform microinterruptions with fast rise/fall time of as low as 200ns as required by GMW 3172, sec. 9.2.18.

The PFM 200N series includes a switch for the power supply line from 100 mA to 200A and a separate switch in the ground return path. These switches can support very high inrush currents up to several hundreds of Ampères. For signal- and data lines an additional 16 channel switch is included with current rating from 100 uA to 2 A per channel.

Key Features

Switch for Power supply (100 A / 200 A) and signal/data lines (2 A)

Pulses E10 and E13 of the LV 124/LV 148 standard

Bidirectional current direction

Separate switch in the ground line

Rise/fall time less than 200ns

Built in short-circuit switch <100 mohm

Rated voltage ±100 VDC

short-circuit-proof

Specifications
PFM 200N Series Automotive Power Fail Simulator; for OEM LV124 and LV 148 and other Manufacturer Standards
Feature	Parameter
Power Line Switch
Switch	2 Switches in the circuit - DC+ Power line - DC- Ground line
DUT Voltage	± 100 VDC
DUT Current	100 mA to 100 A 200 A @ 25 °C
Current Direction	Bidirectional
Switching Time	< 200 ns (rise/fall time)
Repetition Rate	10 µs - 1 h
Drop Duration	1 µs - 1 h
Peak Current	400 A for 200 ms 1,350 A for 1 ms automatic switch-off if I > 1,350 A
Safety	Short circuit protection
Switch for Signal (and Dateline Switch)
Channels	16 independ switched lines
DUT Voltage	Max. ± 40 VDC
DUT Current	100 µA to 2 A, per channel @ 25 °C
Current Direction	Bidirectional
Switching Time	< 1 µs (rise/fall time)
Repetition Rate	500 µs - 1 h
Drop Duration	1 µs - 1 h
Bandwidth	50 MHz / 3 dB
Peak Current	5 A for 200 ms
Safety	Short circuit protection
Connector	PHOENIX, DFMC connector 1.5 mm2 Push-in-spring cage connection
General Switch
Switch Impedance	Power lines: < 50 mOhm Data lines: < 500 mOhm
Internal Switch	Short circuit switch (DC+ to DC-), impedance <100 mOhm)
Internal Switch	100 mOhm, per LV 124
Internal Switch	Low
Internal Switch	High
Trigger
Trigger Out	BNC Plug at the front panel, Automatic release of the events Trigger for oscilloscope, negative slope 15 V
Trigger In	BNC Plug at the front panel, External release of a single event Pull down
Protection
DC Input Protection	Max. voltage ±100 V Clamped > 100 VDC
DC Input Protection	Max. voltage ±40 V Clamped > 40 VDC
Over Temperature	NTC measurement on each mosfet switch
Over Current	On each mosfet switch electronic protection
Current Measurement	Overload measured at output
Interface
Frame bus	Control cable to AutoWave
Monitor Output	DUT out, differential, BNC plug on front panel Ratio 1:20
Suitable BUS Systems for Dataline
BUS Systems	Low Speed Can 100 kbit High Speed Can 500 kbit LIN Bus 19200 Baud FlexRay 10 Mbit
General
Dimensions	19"/3 HU 448 mm x 536 mm x 154 mm
Weight	approx. 10.5 kg
Supply Voltage	100 V - 265 VAC, 50/60 Hz
Fuses	2 x 2 AT
Reference Temperature	23 °C ±5 °C
Temperature	10 °C to 35 °C
Humidity	25 % to 75 %, non condensing
Atmospheric Pressure	86 kPa (860 mbar) to 106 kPa (1 060 mbar)

Specifications
PFM 200N Series Automotive Power Fail Simulator
Model Overview
Model	Description
PFM 200N100.1	DUT current 100 mA to 100 A
PFM 200N200	DUT current 100 mA to 200 A

找不到您要的?

聯繫方式