You are browsing the NL site. Would you like to be redirected to another country or region to see content and products specific to your location?
US
Snelle Offerte: AEMC 5050
AEMC 5050
Megohmmeter Insulation Tester; 5kV
Model
5050Productgroep
Electrical & Power QualityFabrikant
AEMCGeconfigureerde modellen bevatten de volgende opties:
Electrical & Power QualityInsulation / Ground TestingConfiguraties
Belangrijke specificaties
Productoverzicht
Hulpbronnen
Laat ons u helpen, met uw exacte configuratie.
Gebruikt u alstublieft "krijg snel een offerte" , en we zullen u contacteren en een offerte maken voor u.
U kunt ook neem contact op als je dat liever hebt, en onze experts zullen u begeleiden met de juiste applicatie en inkoop oplossing voor dit product.
Belangrijke specificaties
Het spijt ons, maar we hebben op dit moment geen informatie over belangrijke specificaties voor dit product beschikbaar online.
U kunt voor meer informatie contact opnemen met ons en een van onze medewerkers is u dan graag van dienst.
Productoverzicht
The Digital/Analog Megohmmeter Model 5050 is the latest design in 5000V insulation testers.
Features include automatic calculation and presentation of the Dielectric Absorption Ratio (DAR), Polarization Index (PI) and Dielectric Discharge (DD). The True Megohmmeter® Model 5050 displays the test voltage, insulation resistance and the leakage current during the test. Capacitance of the sample and discharge voltage present at the test leads are displayed at the conclusion of the test. This meter is designed with the highest level of built-in safety features. The Model 5050 can be operated from an internal rechargeable battery or from AC line power.
The Model 5060 can be operated from an internal rechargeable battery or from AC line power. An RS-232 port provides the ability to configure the unit and run a test from the PC. Test reports can be generated directly from the instruments to a printer or through the PC using the DataView® analysis software.
| Specifications | |
| Megohmmeter Model 5060 | |
| Features | Parameters |
| AC/DC Voltage Measurement | |
| Range | 1 to 4000V |
| Accuracy | 1 to 99.9V: ±(1% R + 5ct) 100 to 4000V: ±(1% R + 3ct) |
| Resolution | 1 to 99.9V: 0.1V 100 to 999V: 1V 1000 to 4000V: 2V |
| Frequency Range | 1 to 2500V: DC or 15 to 500Hz 2501 to 4000V: DC |
| Input Impedance | 750kΩ or 3MΩ (range dependent) |
| Insulation Measurement | |
| Test Voltage / Resistance Range | 500V: 30kΩ to 2TΩ 1000V: 100kΩ to 4TΩ 2500V: 100kΩ to 10TΩ 5000V: 300kΩ to 10TΩ |
| Measurement Accuracy | 30kΩ to 39.99GΩ: ±(5% R + 3ct) 40.0GΩ 10TΩ: ±(15% R + 10ct) |
| Variable Voltage | 40 to 5,100V |
| Auto Discharge | Discharge time < 7s/µF from Vtest to 25V @ 5000V |
| Live Circuit Indicator | Test inhibition if terminal voltage > 3, 10, 20% (selectable by user) of test voltage |
| General Features | |
| Programmable Alarm | Yes |
| DAR – PI – DD – R(t) | Yes |
| Ramp Mode | No |
| Step Mode | No |
| Capacitance Measurement | 0.005 to 49.99µf |
| Leakage Current Measurement | 0 to 3mA |
| Open Circuit Voltage | ≤ 1.1 x Vn ±2V (Vn ±2% in variable mode) |
| Memory | 4kB Memory / Stores 20 test results |
| Power Supply | Rechargeable NIMH battery pack External 85-256V, 50/60Hz |
| Battery Life | ≥ 1500 tests at 5000V into 5MΩ with a duty cycle of 5 seconds on and 25 seconds off |
| Charging Time | 6 hours approximately (charging allowed during tests) |
| Dimensions | 10.63 x 9.84 x 7.09” (270 x 250 x 180mm) |
| Weight | 9.5 lbs (4.3kg) |
| Altitude Operating | 6562' (2000m) |
| Operating Temperature | 14° to +131°F (-10° to +55°C) ≤80% RH |
| Storage Temperature | -40° to +158°F (-40° to +70°C) ≤90% RH |
| IP Rating | IP 53 |
| Safety Compliance | EN 61010-1 EN 61557 1000V CAT III Pollution Degree 2 CE |
| Specifications | |||
| Megohmmeter Series | |||
| Model Overview | |||
| Models | 5050 | 5060 | 5070 |
| Test Voltage | 500Vdc 1000Vdc 2500Vdc 5000Vdc | 500Vdc 1000Vdc 2500Vdc 5000Vdc | 500Vdc 1000Vdc 2500Vdc 5000Vdc |
| Insulation Range | 10kΩ to 10TΩ | 10kΩ to 10TΩ | 10kΩ to 10TΩ |
| Other Measurement | DAR PI DD Capacitance | DAR PI DD Capacitance | DAR PI DD Capacitance Step Voltage & Temperature Correction |
| Dielectric Discharge | 0.02 to 50.00 | 0.02 to 50.00 | 0.02 to 50.00 |
| Leakage Current | 3mA | 3mA | 3mA |
| Voltage Measurement | 1 to 2500Vac/dc | 1 to 2500Vac/dc | 1 to 2500Vac/dc |
| Memory (Readings) | 20 | 1500 | 1500 |
| Power Source | 9.6V NiMH battery pack | 9.6V NiMH battery pack | 9.6V NiMH battery pack |
| Display | Digital/Analog, bargraph, backlight | 10Ω, 100Ω backlight | Graphical 300 x 240 resolution |
| Communication | — | DataView® software / 128kB memory with RS-232 to USB adapter | DataView® software/ 128kB memory with RS-232 to USB adapter |
| Dimensions | 10.63 x 9.84 x 7.09" | 10.63 x 9.84 x 7.09" | 10.63 x 9.84 x 7.09" |
| Weight | 9.5 lbs | 9.5 lbs | 9.5 lbs |
| Specifications | |
| Megohmmeter | |
| Model Overview | |
| Model / Part Number | Description |
| Model 5050 / 2130.20 | Megohmmeter Model 5050: Digital, with Analog Bargraph Backlight Alarm Timer 500V, 1000V, 2500V, 5000V Auto DAR/PI/DD |
| Model 5060 / 2130.20 | Megohmmeter Model 5060: Digital, with Analog Bargraph Backlight Alarm Timer 500V, 1000V, 2500V, 5000V Auto DAR/PI/DD RS232 DataView software |
| Standard Accessories | Extra large classic tool bag Set of three 10ft (5Kv) leads (red/black/blue) with integral 5000V rated hippo clips Power cord Rechargeable battery pack User manual |
Bronnen
Online bronnen
AMEC Models 1060/5060/5070/6526/6532/6534/6550 & 6555 Brochure
AMEC Model 5050 & 5060 Data Sheet
Kunt u niet vinden wat u zoekt?
Contact opnemen
