The Fujikura 31S is a fully ruggedized, active cladding alignment fusion splicer.
The dual camera active V-groove alignment system provides consistent splicing performance in the most challenging conditions. A 6-second splice time and 25-second shrink time offers unmatched speed and productivity, while an easy-to-use touchscreen monitor provides simple and intuitive menu navigation. Interchangeable sheath clamps or fiber holders provide versatility for user preference, and compatibility with fusion-installable connectors.
The extended-life battery is rated for up to 200 splice and heat cycles. Long-life electrodes, lasting 5,000 splices, help minimize downtime for replacement and stabilization. The large 5" monitor provides a crystal clear image, even in the brightest sunlight. Software updates are accomplished via the internet allowing users to quickly update their software as new splice programs become available.
| Key Features |
| Two-camera active v-groove alignment |
| 5" touchscreen monitor |
| Interchangeable sheath clamps and fiber holders |
| Fully ruggedized for shock, moisture and dust resistance |
| Extended-life electrodes, 5,000 splices, exchangeable without tools |
| Long-life battery (200 splices/shrinks per charge) |
| Specifications |
|
Fujikura 31S
Fusion Splicer
|
|
| Feature | Parameter |
| Applicable Fibers | Single-mode (G.652 & G.657)
Multimode (G.651)
DSF (G.653)
NZDS (G.655)
|
| Cladding Diameter | 125 μm |
| Coating Diameter | 250 μm up to 3 mm |
| Fiber Cleave Length | 5 mm to 16 mm |
| Typical Average Splice Loss | 0.03 dB (SM)
0.01 dB (MM)
0.05 dB (DS)
0.05 dB (NZDS)
|
| Splicing Time | Typical 6 sec with SM |
| Arc Calibration Method | Automatic,
Real-time and by using results of previous splice when in AUTO mode
Manual arc calibration function available
|
| Splicing Modes | Total 100 splice modes |
| Splice Loss Estimate | Based on two camera, active cladding alignment data |
| Storage of Splice Result | 10,000 splice results |
| Fiber Display | 5 inch TFT color LCD;
with X or Y view or both X and Y view simultaneously
|
| Magnification | 200X for single-camera view
132X magnification for dual-camera view
|
| Viewing Method | 2 axis CMOS camera |
| Operating Condition | Altitude: 0 to 5,000 m above sea level, -10° to +50° C
Humidity: 0 to 95% RH, non-dew
|
| Mechanical Proof Test | 1.96 N |
| Tube Heater | 30 heating modes |
| Tube Heating Time | Typical 25 sec with FP-60 (60 mm) sleeve |
| Protection Sleeve Length | 60 mm
40 mm
micro
|
| Splice/Heat Cycles with Battery | Typical 200 cycles with BTR-11 |
| Electrode Life | 5,000 splices |
| Power Supply | Auto select from 100 V to 240 V with AC adapter
14.8 V DC with installed battery
|
| Terminals | USB 2.0 |
| Wind Protection | Maximum wind velocity of 15 m/s. (34 mph) |
| Dimensions | 131 x 201 x 79 (mm) |
| Weight | 1,300 g (2.85 lbs) with battery |
| Specifications |
|
Fujikura 31S
Fusion Splicer
|
|
| Model Overview |
|
| Model | Description |
Fujikura 31S Fusion Splicer
(S017081)
| Fujikura 31S Fusion Splicer
Includes:
S31A Sheath clamps (installed)
SP-31 Set Plates
ADC-19A AC Adapter
BTR-11 Battery Pack (installed)
FH-70-250 Fiber Holders
FH-70-900 Fiber Holders
ACC-09 Power Cord
ELCT2-16B Spare Electrodes (pair)
Operation Manual on CD
Quick Reference Guide
SS-03 Single Fiber Stripper
CC-35 Transit Case
|
Fujikura 31S Fusion Splicer Kit with CT08 Cleaver
(S017109)
| Fujikura 31S Fusion Splicer
Includes:
CT08 Cleaver
S31A Sheath clamps (installed)
SP-31 Set Plates
ADC-19A AC Adapter
BTR-11 Battery Pack (installed)
FH-70-250 Fiber Holders
FH-70-900 Fiber Holders
ACC-09 Power Cord
ELCT2-16B Spare Electrodes (pair)
Operation Manual on CD
Quick Reference Guide
SS-03 Single Fiber Stripper
CC-35 Transit Case
|
| S012996 | One Year Extended Warranty |
| S013000 | Two Year Extended Warranty |
