Series 2230 power supplies provide up to 375 W of power in a compact 2 U high, half-rack wide enclosure. The 2230-30-6 offers up to 6 A from two channels; the 2230-60-3 offers up to 60 V from two channels. Adjustable, independent, and isolated channels can test two single voltage devices or a multiple voltage device with one power supply.
Combine 30 V channels in series to increase voltage up to 60 V, or connect two or three channels in parallel to output as much as 15 A using the 2230-30-6.
| Key Features |
| Choose from one 195 W model and two 375 W models |
| 195 W model has two 30 V, 3 A channels and one 5 V, 3 A channel |
| 375 W models have two 30 V, 6 A channels or two 60 V, 3 A channels and one 5 V, 3 A channel |
| All channels are independently controlled and are isolated to power a wide range of test setups |
| All channels have remote sensing so the programmed voltage is accurately applied to the load |
| Set and monitor output voltages with 0.03% basic accuracy and 1 mV resolution |
| Monitor load current with 0.1% basic accuracy and 1 mA resolution |
| Low noise, linear regulation with |
| Combine channels in series to output as high as 60 V and in parallel with two or three channels to create capacity as high as 15 A (2230-30-6) |
| Voltage and current outputs of three channels are displayed simultaneously for immediate observation of each output state |
| USB and RS-232 interfaces and rear panel connections for automated test convenience |
| Benefits |
|
| Control Noise with Independent Outputs | The 2230 power supplies can power circuits that are optically isolated or transformer-isolated from each other and have different reference points.
The isolated channels eliminate the need for a second power supply for powering one of the isolated circuits.
Additionally, each channel can be independently controlled and turned on or off at any time; control over each individual channel minimizes noise in the circuit.
|
| Control Noise with Independent Outputs | Each 2230 channel offers 0.03% basic voltage accuracy and 1 mV resolution setting and measurement, ensuring that the programmed output is accurately applied to the output terminals.
Plus, using remote sense leads for each channel compensates for and overcomes voltage drops due to resistances in the test leads, assuring that the programmed voltage is applied to the load.
|
| Automation Made Easy | USB and RS-232 interfaces enable complete control of the 2230 power supplies from a PC.
LabView and IVI drivers facilitate instrument control, data logging, and analysis.
Series 2230 power supplies can be controlled in either a semi-automated or full-automated test system with these drivers or software packages such as MatLab.
|
| Applications |
|
| Series 2230 Power Supplies are Ideal for Testing: | High power analog ICs
Automotive circuits
Telecom infrastructure circuits
LED driver circuitry
Wide Bandgap modules
|
| Specifications |
|
2230 Series
High Power Programmable Power Supplies
|
|
| Feature | Parameter |
| Communications | USB: Type A to B connector, USB 2.0, USBTMC compatible
RS232: Baud Rates: 4800/9600/19,200/38,400/57,600/115,200
|
| Rear-Panel Connectors | Output: 15-pin terminal block socket
RS-232: DB-9 connector
USB Device: Type B connector
AC Power Input: 3-prong socket assembly with fuse
|
| Display | Vacuum fluorescent display |
| Memory | 36 setup memories |
| Output and Remote Sense | Removable 15-15-pin screw-terminal block carries the following signals:
Output Channels: Duplicates the front-panel outputs
Remote Sense Lines: Connections for remote sense for each channel
|
| Floating Voltage Rating | Up to 400 V (DC + peak AC) between protective earth (safety ground) and any output terminal |
| Power Source | 110 V AC Setting:
99 VRMS to 132 VRMS
108 VRMS to 132 VRMS (2230-30-6 and 2230-60-3 with 2230G-HRM installed)
220 V AC Setting:
198 VRMS to 264 VRMS
Frequency:
50/60 Hz
Power Consumption:
2230-30-3: 700 VAC; 2230-30-6, 2230-60-3: 1000 VAC
|
| EMC | European Union: Conforms to European Union EMC directive
USA: FCC, CFR Title 47, Part 15, Subpart B, Class A
Australia: EMC Framework, demonstrated per Emission Standard AS/NZS 2064 (industrial, scientific, and medical equipment)
|
| Safety | European Union: Conforms to Low Voltage Directive
USA: NRTL listed to UL61010-1-2004
Canada: CAN/CSA C22.2 No. 61010-1 2004
|
Dimensions
(H x W x D)
| With boot:
104.2 mm × 225.3 mm × 481.1 mm
4.10 in. × 8.87 in. × 18.94 in.
Without boot:
88.2 mm × 214.5 mm × 456.6 mm
3.47 in. × 8.44 in. × 17.98 in.
|
| Shipping Weight | 2230-30-3: 12.3 kg / 27 lb.
2230-30-6: 13.8 kg / 30 lb.
2230-60-3: 13.8 kg / 30 lb.
|
| Net Weight | 2230-30-3: 9.6 kg / 21 lb.)
2230-30-6: 11.1 kg / 24 lb.)
2230-60-3: 11.1 kg / 24 lb.)
|
| Operating Altitude | Up to 2000 meters (6562 ft ) above sea level |
| Storage Altitude | Up to 4000 meters (13124 ft ) above sea level |
| Operating Temperature | 0 °C to 40 °C, 10% to 80% relative humidity up to 40°C |
| Storage Temperature | –20°C to 70°C, 10% to 80% relative humidity up to 40°C
–20°C to 70°C, 5% to 60% relative humidity above 40°C up to 70°C
|
| Specifications |
|
|
|
|
2230 Series
High Power Programmable Power Supplies
|
|
|
|
|
| Model Overview |
|
|
|
|
| Model | Total Power | Channel 1 and 2 Max V | Channel 1 and 2 Max I | Channel 3 Max V and I |
| 2230-30-3 | 195W | 30 V | 3A | 5V @ 3A |
| 2230-60-3 | 375W | 60V | 3A | 5V @ 3A |
| 2230-30-6 | 375W | 30V | 6A | 5V @ 3A |
