10 MHz to 50 GHz, 2-ports with one source and 4-ports with two sources, source and receiver attenuators, bias-tees, pulse generators and modulators, noise figure, and best RF performance.
The PNA Series of network analyzers offers industry-leading performance for testing amplifiers, mixers, and frequency converters. The PNA Series combines hardware and applications to measure a broad range of devices fast and accurately. All models are available in two-port single-source and four-port dual-source versions. Built-in pulse modulators and pulse generators provide pulsed S-parameter measurements.
| Key Features |
| Measure S-parameters with the smallest uncertainty and highest stability |
| Efficiently characterize active components with applications that simplify setups |
| Wide dynamic range: >127dB dynamic range at test port (typical) above 500MHz |
| 131 dB receiver dynamic range 32,001 points, 32 channels, 15MHz IF bandwidth |
| High output power: (+13dBm) and a wide power sweep range (38dB) |
| Low noise floor: -114dBm at 10Hz IF bandwidth |
| 12.1 inch color LCD, touch screen |
| RF connector type 2.4mm (m), 50ohm |
| 4 USB on Front panel 2.0 compatible |
| VGA video output |
| Built in Handler I/O, LAN, USB, GPIB interfaces and Peripheral ports on rear |
| Benefits |
| Solve your toughest measurement challenges with the highest-performing microwave network analyzer in the industry. |
| Measure S-parameters with the smallest uncertainty and highest stability. |
| Efficiently characterize active components with applications that simplify setups. |
| Accelerate insight into component behavior using a multitouch display and intuitive user interface. |
| Meet your budget and measurement requirements by customizing to the right level of performance. |
| Specifications |
|
N5225B
PNA Network Analyzer
|
|
| Feature | Parameter |
| Maximum Frequency | 50 GHz |
| Number of Built-In Ports | 2 or 4 ports |
| Harmonics | -60 dBc |
| Network Analyzer Series | PNA High Performance |
| Specifications |
|
PNA Series
Network Analyzers
|
|
| Model Overview |
|
| Model | Description |
| N5221B | 900 Hz/10 MHz to 13.5 GHz |
| N5222B | 900 Hz/10 MHz to 26.5 GHz |
| N5224B | 900 Hz/10 MHz to 43.5 GHz |
| N5225B | 900 Hz/10 MHz to 50 GHz |
| N5227B | 900 Hz/10 MHz to 67 GHz (70 GHz) |
| Specifications |
|
|
| PNA Family Network Analyzers Overview |
|
|
| Model | Frequency | Test Port Connector |
| PNA-X Series |
|
|
| N5249B | 900 Hz/10 MHz to 8.5 GHz | 3.5 mm (male) |
| N5241B | 900 Hz/10 MHz to 13.5 GHz | 3.5 mm (male) |
| N5242B | 900 Hz/10 MHz to 26.5 GHz | 3.5 mm (male) |
| N5244B | 900 Hz/10 MHz to 43.5 GHz | 2.4 mm (male) |
| N5245B | 900 Hz/10 MHz to 50 GHz | 2.4 mm (male) |
| N5247B | 900 Hz/10 MHz to 67 GHz (70 GHz) | 1.85 mm (male) |
| PNA Series |
|
|
| N5221B | 900 Hz/10 MHz to 13.5 GHz | 3.5 mm (male) |
| N5222B | 900 Hz/10 MHz to 26.5 GHz | 3.5 mm (male) |
| N5224B | 900 Hz/10 MHz to 43.5 GHz | 2.4 mm (male) |
| N5225B | 900 Hz/10 MHz to 50 GHz | 2.4 mm (male) |
| N5227B | 900 Hz/10 MHz to 67 GHz (70 GHz) | 1.85 mm (male) |
| PNA-L Series |
|
|
| N5239B | 300 kHz to 8.5 GHz | 3.5 mm (male) |
| N5231B | 300 kHz to 13.5 GHz | 3.5 mm (male) |
| N5232B | 300 kHz to 20 GHz | 3.5 mm (male) |
| N5234B | 10 MHz to 43.5 GHz | 2.4 mm (male) |
| N5235B | 10 MHz to 50 GHz | 2.4 mm (male) |
